14900k and 4x Dominator Titanium 32gb kernel_security_check_failure when installing Amoury Crate

[Dragonfly79887]

12/24/2023 :

I have 1 system: 14900k and 4 x Ram Corsair Dominator Titanium RGB 2 Kit x ​​(2x32GB) DDR5 6000MT/s CL30 (Total 128 gb max 4 dim) I have updated newest BIOS ver 0507 (on ASUS website, where can I get a newer update? Please let me know) - The main problem I encountered was when I newly installed Windows 10 - 64 bit. After the windows welcome screen, I received a notification asking if I wanted to install "Amoury Crate and Lan driver" and of course I chose yes to install the lan driver (blue dump when installing Amoury crate ). The installation took a long time. and after a while I got a blue dump screen. I tried reinstalling windows 5-7 times and reinstalling Amoury Crate but the result is still the same. STOP CODE : kernel_security_check_failure 

Update 12/26/2023

For now I ignore Amoury crate and won't install it again until a more stable Bios version is available.

After updating to Bios 0801, it seems I can turn my computer on and off normally using the on/off button on the PC case. With my configuration, I didn't use XMP but just manually adjusted my DDR5 Cosair to 5800, then I got a blue screen error with the error error code: Bad ..... something I don't remember exactly. Then I tried adjusting my DDR5 to BUS 5600 and I got into Windows 10 normally. Currently my system is fine, I will continue to use it and hope it is stable. I will report back when there is new information

I have attached photos below the article. Hope to receive advice from you guys.

[Dragonfly79887]

Thank you for sharing. It was truly a wise choice

[Noyatje]

hi, just install the drivers from the website of the brands ( latest drivers )

about armoury crate, i got it only working properly when installing w10. no issues anymore.

going to keep w10 for now till they update armoury crate. there is a issue between w11 and armoury crate. and i dont think they even know what going on with there software. 

hope it works out for you 

[Dragonfly79887]

Thank you for sharing. I always install the driver from the ASUS homepage and of course it is the latest.

I have the following configuration:
i9-14900K .
ASUS ROG Z790 DARK HERO.
Ram Corsair Dominator Titanium RGB 2x Kit 64GB .(2x32GB) DDR5 6000MT/s CL30 (Total 4 x 32 = 128 g).
Asus Rog Strix RTX 4060Ti OC 8GB Gaming.
2 x SSD 990 PRO PCIe Gen 4.0 x4 NVMe V-NAND M.2 2280( MZ-V9P4T0BW )
Sound Card Blaster AE-9
Network Card TP Link TX401

Can you guide me on how to install the following components ( Select PCI slot to optimize the system )  to achieve optimal capacity? I am currently installing the following:

[Dragonfly79887]

Actually, I'm still using Windows 10 and got a BSOD when trying to install Amoury Crate. So I ignored Amoury Crate and didn't install it because I was afraid of BSOD and wasting resources for nothing. But today, you informed me that AM has a new update so I will try it. .

[Noyatje]

Armoury crate got a update today everything seems fine for now, everthing is working smooth again 

grtz

[Dragonfly79887]

Thank you for the valuable information. I'm not sure Amoury Crate would be any good, even if it ran smoothly. What I mean is that it takes up a lot of PC resources, while it may not offer the latest, most stable BIOS and DRIVER at the time of installation. I'm new to the forum, I'm also a user who doesn't have as much knowledge as the bros here. But I know Mokichu for his kindness, his wisdom, and his latest and greatest DRIVER updates. But maybe I will still try the new Amoury Crate to see if it can update the latest Drivers. Can you follow this with me? Thanks for everything.