cancel
Showing results for 
Search instead for 
Did you mean: 

Z590 Prime-A: VCCIO Mem OC - Volt => Readout wrong (in Software)

JoergH
Level 7
Hi,

when i look in my Bios, my VCCIO Mem OC is 1,152V (which is what i set there).
So far, so good.

But any software like Aida64 or HWiNFO shows me a VCCIO Mem OC of 0,576V (which is exact the half of the correct value).

Is here anybody with a PRIME-A Z590 Board (and a 11th Gen Intel) to confirm this?

I know that the Bios-Value is the correct one... I thing the PC would not run without any issues if the VCCIO2 was only 0,576...:-)

So, Bios is right, Software is wrong... but why?

I know that the readout from the Hero- or Strix-Modells seem to be correct...

So, Z590 Prime-A Users with a 11th Gen Intel -> can you check this (you can use HWiNFO)...

Thanks!
Greetings!
650 Views
1 REPLY 1

JoergH
Level 7
Ok, Bug in Hwinfo & Aida…

They confirmed the bug and they fix it in the next version…*