cancel
Showing results for 
Search instead for 
Did you mean: 

CMK32GX4M2D3600C18 not higher than 3000

caheyne
Level 7
Hopefully, somebody can help me.

I do have an Asus Prime Z 490-A motherboard with a 10700KF and two CMK32GX4M2D3600C18 and latest bios 2201.
I can't get the speed higher than 3000 while it's 3600 memory.
settings 18-22-22-42 1.35V
I have to set manually speed to 3000, if on automatic or if I put it myself higher than 3000, system goes in POST or blue screen.

What am I doing wrong?
2,031 Views
7 REPLIES 7

Silent_Scone
Super Moderator
Hello,

Have you tried adjusting the VCCSA voltage?

Try values between 1.2 - 1.35v.
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Silent Scone@ROG wrote:
Hello,

Have you tried adjusting the VCCSA voltage?

Try values between 1.2 - 1.35v.


I will try today, keep you posted, thanks!

caheyne wrote:
I will try today, keep you posted, thanks!


1.25 and 3100mhz, that's the highest I can get! Strange.

caheyne wrote:
1.25 and 3100mhz, that's the highest I can get! Strange.




SOLVED
My bad, thought had the right banks, checked again, everything okay now! XMP I or XMP II, all works!

Thanks guys!

fed_olivera
Level 7
Why is a lot of people having troubles to reach more than 3000 mhz on rams? I'm also in that boat, cannot get past 3000 with a 3600 kit without troubles, have a z490e board. Is this a known issue?

bscool
Level 11
Something to check if you are in the correct slots. a2 and b2 or check the manual. I know it shouldn't need to be said but I have seen it happen.

bscool wrote:
Something to check if you are in the correct slots. a2 and b2 or check the manual. I know it shouldn't need to be said but I have seen it happen.



Thanks!