Hi, someone has issues with TUF GAMING Z590-PLUS and bios version 0810 ?I don't know but I noticied some problems with my SATA AHCI Disk: Western Digital 4 Tb model ST400NE001-2MA101 WJG0HZFLIn addtition to this I saw that the Gigabyte program RGB...
Hello All,I currently have an i9 11900K (tray version) in my Asus Maximus Xiii Hero. `But I will get an i9 11900k Boxed in the next few days and only want to keep one (the better one).But how can I best test the quality?Does the SP value say anything...
Hi, is it convenient to switch from SATA AHCI mode to Intel RST Premium with Intel Optane system accelerator (RAID)*?Now I have Windows 10 Professional installed and I am in AHCI mode: how should I go to Intel RST Premium with Intel Optane system acc...
The LightningService, which seems to be Connected to Aura Sync/RGB, allways use between 1-5%, is this normal behavior? I can stop the service, but then my RGB seems to freeze, not the biggest deal, but is there a way of either getting this process to...
Currently missing 3 drivers on the Z590-F board, anyone know what they might be?Two PCI units and one unknown, the unknown one, might that be acpi? Which there is no drivers for yet?https://imgur.com/DGV4z7j - Device Manager
Does anyone know where the AIDA Extreme redemption code is with the XIII Hero?
Hello,as the title says, I'm looking for a memory kit for an upcoming Z590/11900K build.I need 64 GB and correct me if I'm wrong please but I would tend to get a 2x32GB DS kit over a 4x16. Any recommendations? I would also like to run the system at ...
Hi Guys,Today I saw an unknown device in the device manager. I am sure that I have installed all the drivers, I can not see what that should be.d7b46895-001a-4942-891f-a7d46610a843ACPI \ VEN_INT & DEV_3472Does somebody has any idea?
Hey guys, just picked up my 11900k and under the PCIe setting I just see Gen 1,2, and 3? I was able to enable the Gen 4 for the video card slot?
Hi, using the program Intel Extreme Tuning Utility in the section:Speed OptimizerI cannot click on:Optimize Nowbecause "System already optimized using manual tuning"Please, take a look at the screenshot below:How I can enable this feature ?I have set...
