Intel 500 & 400 Series
Showing results for 
Search instead for 
Did you mean: 

Forum Posts


Time to upgrade my machine. Currently runningAsus Rampage IV Formula (x79)Intel i7-3930K @ 4.2 all cores.So it's been a long time since I upgraded. I mostly use my machine for FPS games. I'm thinking about going with Intel i9-11900kfAsus Rog Strix Z5...

BearCat by Level 10
  • 8 replies
  • 0 kudos

Maximus XII Hero Won't Boot With XMP Enabled

As the title says... Flashed to the most recent bios, RAM is 32GB Corsair Vengeance LPX 3200. When I enable the profile in BIOS it won't boot and goes straight to BIOS. It boots when disabled but doesn't run at full speed. Any help is appreciated.

haybob by Level 7
  • 3 replies
  • 0 kudos


Hi;I set in BIOS the PCIe X16_1 to Gen 4 but the GPU z show me PCIe x16 4.0@ x16 1.1 when i have z390 i set bios Gen 3 always GPU z show me PCIe x16 3.0@ x16 3.0so what is this ?? why is z590 F*k many issuescoil whine in motherboard , issue in vol...

Wake on LAN Bios Setting

I have a ROG STRIX Z490-I GAMING and I want to use Wake on LAN.There does not seem to be a relevant setting anywhere in the bios.Please can someone point me in the right direction?Thanks in advance

edcoppen by Level 7
  • 11 replies
  • 0 kudos

Z590 Hero with 4 sticks of DIMM overclocking

I'm currently running 4 sticks of DIMM on Z590 Hero mobo. Found out that I can't overclock memory as high as before when I was running with only 2 sticks of DIMM.Using 4x 16GB Hynix DJR chip.With only 2x 16GB DIMM, easily run at 4000MHz @ 1.4V (18-2...

Asus Z490-E gaming audio ports retasking.

Hi,I have a little problem with realtek audio console not allowing me to retask audio jacks on the back of the pc. I basically want to plug in my 2.1 speaker setup and headphones at the back and just switch between them, but realtek audio console won...

Z490-F RAM Issue

Hello everyone.I am having problem with my recently purchased Z490-F, hoping someone can give some ideas.I Initially got my hands on Patriot PVS416G440C9K memory, and plugged them into A2 and B2 RAM slots per manual's suggestion.They worked great, al...