©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Shamino · ‎05-21-2020

Braegnok · ‎04-09-2021

I flashed over 0098 with the new 4/7/2021 version 2102, and after system updated LED, OLED, and ME everything is good to go.

Q-FAN is working, all my fan curves are set, sweet!

morph_ · ‎04-09-2021

Just installed RKL 11900k in my M12F with bios 2102.

Did a quick qfan calibration and they seem to be working fine.

Had issues posting as my vmount ribbon for my 3090 is pcie 3.0 so had to get inventive to post with a old video card and another pcie 3.0 ribbon for now. have tweaked everything pcie related to 3.0 for now and will see if it will boot.

What's this thing about updating intel me & the microcode for the bios image I'm hearing from Falkentyne that will improve fps/memory speeds?

Thanks!

Lotzi · ‎04-09-2021

morph. wrote:
Just installed RKL 11900k in my M12F with bios 2102.

Did a quick qfan calibration and they seem to be working fine.

Had issues posting as my vmount ribbon for my 3090 is pcie 3.0 so had to get inventive to post with a old video card and another pcie 3.0 ribbon for now. have tweaked everything pcie related to 3.0 for now and will see if it will boot.

What's this thing about updating intel me & the microcode for the bios image I'm hearing from Falkentyne that will improve fps/memory speeds?

Thanks!

Can you thx to this ppl who post the link to the newest Bios you asked so friendly for??

Ataemonus · ‎04-09-2021

What is connexcted to Chassis Fan 1 header, that is has a low PWM signal of 5% ? Very interesting.

kvarq · ‎04-09-2021

are there any voltage gains with 2102 compared to 2002/2004 beta?

Braegnok · ‎04-09-2021

I'm just now starting to put in some memory profiles, the 2102 BIOS memory training is working vary well on M12E board.

I have loaded 2x16GB 3600 CL14, 4000 CL15, 4400 CL16 so far and all I put in was primary #s, with round trip latency enabled, trace centering enabled.

The system memory training put in vary tight to extreme #s on everything except tWR, tRFC, tREFI, tFAW, with RTLs 55-56 and IO-Ls set at 7-7 that is vary nice training, only need to adjust four settings.

I'm going to load a few 2x8 and 4x8GB memory profiles, and start testing memory before bumping up CPU.

Looking at what system is using with Auto Caps Settings, a light load on system. I'm thinking the voltages are going to be the same as 2002/2004.

CSN7 · ‎04-12-2021

I just installed a 11900k in my Z490 Apex, switched to the second bios, loaded bios 2101 via the port in the back, bios flash back which seemed to have worked fine.

However when I boot it seems to work fine up until a point where it's almost done and then turns off the system and then does the same thing over and over.

Am I missing something?

thx!

RobertoSampaio · ‎04-12-2021

When you update the BIOS is usual the system to restart several times...

broncogr · ‎04-12-2021

CSN7 wrote:
I just installed a 11900k in my Z490 Apex, switched to the second bios, loaded bios 2101 via the port in the back, bios flash back which seemed to have worked fine.

However when I boot it seems to work fine up until a point where it's almost done and then turns off the system and then does the same thing over and over.

Am I missing something?

thx!

Update both BIOSes to 2101

CSN7 · ‎04-12-2021

I know, but it doesn't stop I should have clarified that lol

Asus Z490 stuff