Hi. What does power limit throttling mean in this context?
I am running things at cpu 49x / processor cache 43x (pretty low) during this, temp 64C, and the power limit throttling is constantly on.
Do I need to repaste, or find another cooling solution? Currently, I use Corsair Hydro Series H115i RGB Platinum, M12E, i9-10900K.
I am running things at cpu 49x / processor cache 43x (pretty low) during this, temp 64C, and the power limit throttling is constantly on.
Do I need to repaste, or find another cooling solution? Currently, I use Corsair Hydro Series H115i RGB Platinum, M12E, i9-10900K.
martine-dee wrote:
Hi. What does power limit throttling mean in this context?
I am running things at cpu 49x / processor cache 43x (pretty low) during this, temp 64C, and the power limit throttling is constantly on.
Do I need to repaste, or find another cooling solution? Currently, I use Corsair Hydro Series H115i RGB Platinum, M12E, i9-10900K.
Hi it doesn't thermal throttle but power throttle so maybe the CPU draws more current/power than whats set in the bios. See if you can find the power limit in the BIOS and tell us what it is 🙂
martine-dee wrote:
Hi. What does power limit throttling mean in this context?
I am running things at cpu 49x / processor cache 43x (pretty low) during this, temp 64C, and the power limit throttling is constantly on.
Do I need to repaste, or find another cooling solution? Currently, I use Corsair Hydro Series H115i RGB Platinum, M12E, i9-10900K.
10900k is hungry power house . if you disable those limit expect more heat
Are you using auto Voltage for Vcore? (Auto voltage is crap is too high and cpu generate more heat, if you undervolt you can gain better performance even without setting those limits)
For disabling Power throtle you have 2 options
On main page
1. Enable asus multicore enhancer (option disable all limits) this should set everything for you
2. manualy set on main page tweaker
CPU current limit
Internal CPU power management
Long duration package power
Short package power
package power time
just write 99999 in all and it will automaticly set the numbers
KotOr368 wrote:
...
Thanks, I played with this, and things got better. I still have a long way to go before I find a good voltage. I will leave that for some other post.
Right now I discovered a new thing. Not a week ago, I got one F4-4000C15Q-32GTZR. But now that I have it, I experience frequent crashes of the game.
I ran memtest86 on those sticks, and it found 18 errors in the four passes (see below). In total, the test 6 failed 3/4 times. Since those crashes started with the new RAM, it points to RAM being the issue. Is there something else I should try before I return the kit? The kit is in the QVL for the M12E, therefore it should just work.
kvarq wrote:It's been nothing but issues with my Mobo and I had similar issues with no internet connection and went through all the steps and tried, I never used my PC via Wi-Fi and then it occurred to me that my Mobo is Z490-G Wi-Fi, so I downloaded the Wi-Fi drivers to connect via Wi-Fi put the antenna and updated Windows 10 and made sure everything was up to date.
mine didn't work with 1.0.1.3 either, still cable unplugged (Asus XII Apex)
shouldn't have updated the firmware
from the device manager properties it has to be changed the policy from "auto negotiate" in "full flux 100Mb" or whatever works... and then connection is established
- I downloaded the Armoury Crate software and installed v1.0.1.3
- I went back to updating the v.1.45 firmware waited for it to say successfully complete and then shutdown PC and Unplugged the PSU.
- I waited about a minute plugged it back in turn system on and went back to downloading the LAN update Driver v1.0.1.4
- Its working and I've tested my connection no issues.
Right now I'm having 2 issues with my Mobo
- DIMM Slot 1: The system wont boot up when memory stick is on (Slot # 1) I switched each memory to (Slot # 1) same results, I get the yellow indicator.
- BIOS Update: I keep getting this message "Not Proper BIOS" and I'm afraid to update the BIOS due to people having issues after updating specific versions.
