not really...
XMP is not a go now for my 2x16 @ 4000 kit
tried the auto voltages when XMP is activated (IO 1.4V and SA 1.5V) also the IO/SA voltages which have been stable using the previous version
on 2403 my 2x16 4000MHz C16 kit (F4-4000C16D-32GTRSA) was stable using 1.28V IO and 1.36V SA
the TPM option is always on no matter if is set off
1003 vs 2403 vs 2601
XMP is not a go now for my 2x16 @ 4000 kit
tried the auto voltages when XMP is activated (IO 1.4V and SA 1.5V) also the IO/SA voltages which have been stable using the previous version
on 2403 my 2x16 4000MHz C16 kit (F4-4000C16D-32GTRSA) was stable using 1.28V IO and 1.36V SA
the TPM option is always on no matter if is set off
1003 vs 2403 vs 2601
or I might roll back to 2403 instead testing everything again 🙂
XMP should be XMP, we're not in the Z690 area here =))
yeah, I know, on manual there is a different story though, I remember the 1003/2004 good old days, ran my 2x16 3200C14 (F4-3200C14D-32GTZSK)
for the 4000C16 setting I think I needed 1.45V VRAM and 1.30V SA to pass GSAT overnight
XMP should be XMP, we're not in the Z690 area here =))
yeah, I know, on manual there is a different story though, I remember the 1003/2004 good old days, ran my 2x16 3200C14 (F4-3200C14D-32GTZSK)
for the 4000C16 setting I think I needed 1.45V VRAM and 1.30V SA to pass GSAT overnight
