05-21-2020 12:58 AM
01-07-2021 10:15 AM
rstolpe1988 wrote:
The big Q for me is if the m2 ports are going to support pcie4?
01-09-2021 04:08 AM
hsm06 wrote:
I don’t think the BIOS update can make m.2 support PCIE 4.0.
After all, Z490 M.2 is currently routed by PCH.
The 11th 500 series will be connected to an M.2 by the native PCIE controller of the CPU, not by the PCH.
I think the current BIOS just allows the motherboard to recognize and use 11TH CPU normally.
-------------------------------------------------------------------------------------------------------------------------------------------------
The 2002 version of the BIOS does not seem to have added the PATCH CODE of the previous BIOS version ( Improve system stability and performance related information) .
I use XII HERO with ASUS Xonar STX II PCIE sound card, it will cause BSOD: DRIVER_VERIFIER_DMA_VIOLATION.
This problem has been resolved in the 0607 version update (1003 version is also in normal use).
Update to the BIOS version 2002, as long as you play music and use the ASUS Xonar STX II sound card,
it will immediately blue screen: DRIVER_VERIFIER_DMA_VIOLATION.
Currently USB BIOS flashback on the motherboard to flash 2002 back to 1003 for normal use.
01-09-2021 11:12 AM
neo2006a wrote:
Installed 2002 bios. My STX II works fine, no BSODs.
Interestingly, some settings in the memory section have been added in this bios:
Command Normalization
Early DQ Write Drive Strength and Equalization Training
Read Voltage Centering 1D
Dimm ODT CA Training
DCC Initialization & Finalization
DQ DFE Training
tRDRD_dg_Training
tRDRD_dg_Runtime
I don't know if it will have any impact on the memory OC.
01-10-2021 02:15 AM
hsm06 wrote:
Which slot is your stx ii installed in?
Is vt&vt-d enabled in bios?
I just bsod as soon as I play foobar2000.
Can provide detailed hardware configuration ?
01-10-2021 06:10 AM
neo2006a wrote:
Z490-F, 10700, Patriot Viper 4x8GB, GTX1060, win10 2004
Installed in the lowest pcie
VT-D - disabled
foobar also works fine
01-09-2021 01:38 PM
neo2006a wrote:
Installed 2002 bios. My STX II works fine, no BSODs.
Interestingly, some settings in the memory section have been added in this bios:
Command Normalization
Early DQ Write Drive Strength and Equalization Training
Read Voltage Centering 1D
Dimm ODT CA Training
DCC Initialization & Finalization
DQ DFE Training
tRDRD_dg_Training
tRDRD_dg_Runtime
I don't know if it will have any impact on the memory OC.
01-08-2021 05:24 AM
01-08-2021 07:26 AM
01-08-2021 03:39 PM
01-13-2021 02:27 AM