©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Shamino · ‎05-21-2020

Enderwiggin03 · ‎10-04-2020

RobertoSampaio wrote:
Hi folks,

Do you think is there any problem to leave VCCIO and VCCSA in AUTO ?

I can't believe ASUS would use a so hi voltage that could damage CPU... Or I'm wrong?

If under 1.3v you should be alright on auto.

RobertoSampaio · ‎10-04-2020

AUTO sets VCCIO/VCCSA exactly 1.3V/1.3V

bunnyb · ‎10-06-2020

Hi all, I'm looking for some guidance, as Ive had a very disappointing first impression with this board and thats a first, because, Ive been preferring to buy Asus boards since I was a child.
Please do not tempt me with the thought of moving onto another brand for the first time in my life

I have a z490-G wifi board, and im having a miserable time plagued with this "Intel I255-V" issue.
I bought this board for its size, not the wifi capability. I want to use Ethernet.
I have already had to exchange the board once because I did EVERYTHING EVER LISTED ON THE INTERNET (including the obscure "windows settings disabled" combined with rain dances at 3:13AM on a Thursday to try and get the Ethernet port to work, but nothing succeeded.

Seriously, the juggle that Intel has imposed on us is not cute or funny, in anyway at all.
I am a $&#*@$! pissed off customer right now.

I have no lights on the back of the board. No matter what I do, Windows is constantly saying "an Ethernet is unplugged"
I have gone through the 1.45 firmware update.
Ive gone to 607 and 707 BIOS.
Ive done drivers 1.0.0.9, 1.0.0.13, 1.0.1.4, 1.0.1.7.
Ive done power downs.
I have repeated all of these steps, with constant fresh reformats, much to my M.2 ssd's dismay.

All of this was done on the board I exchanged.
I now have a completely untouched fresh board installed with fresh windows and it is still doing the exact same issue (No lights, same constant error).
I am unsure how to proceed.

The physical board has a "rev 1.03" written under the name.
It is currently sitting with stock BIOS 407.
It currently is sitting with Driver 1.0.0.13, as per the "auto download Ethernet driver" that the z490-g does when you turn on a fresh install.

Please. Someone.

Tell me HOW to update this thing for success and HOW to make sure I NEVER have to mess with this again?
What is the issue with this port, and will this board be a nightmare for the rest of my ownership?
How and When will this board be completely rid of this bug/hardware(?) issue?

Im most unexcellent over here.
I need help.
Thank you.

RobertoSampaio · ‎10-06-2020

I have some strangers things happen to Maximus xii formula 0707 bios...

1 - I change pll bandwidth and the CPU PLL OC changed from 1.2v to 2.3v... I returned to default and CPU PLL OC didn't return to 1.2V. It was necessary to clear cmos

2 - I saved bios to a profile and the name I used, when I return to load it, was corrupted. It was necessary to clear cmos

3 - I experienced freezing events. Cleared cmos and used the same configuration... and now it's all working.

Seems like some configurations stay saved in the background and the only way to restart is to clear cmos.

EXILE157 · ‎10-16-2020

bunnyb wrote:
Hi all, I'm looking for some guidance, as Ive had a very disappointing first impression with this board and thats a first, because, Ive been preferring to buy Asus boards since I was a child.
Please do not tempt me with the thought of moving onto another brand for the first time in my life

I have a z490-G wifi board, and im having a miserable time plagued with this "Intel I255-V" issue.
I bought this board for its size, not the wifi capability. I want to use Ethernet.
I have already had to exchange the board once because I did EVERYTHING EVER LISTED ON THE INTERNET (including the obscure "windows settings disabled" combined with rain dances at 3:13AM on a Thursday to try and get the Ethernet port to work, but nothing succeeded.

Seriously, the juggle that Intel has imposed on us is not cute or funny, in anyway at all.
I am a $&#*@$! pissed off customer right now.

I have no lights on the back of the board. No matter what I do, Windows is constantly saying "an Ethernet is unplugged"
I have gone through the 1.45 firmware update.
Ive gone to 607 and 707 BIOS.
Ive done drivers 1.0.0.9, 1.0.0.13, 1.0.1.4, 1.0.1.7.
Ive done power downs.
I have repeated all of these steps, with constant fresh reformats, much to my M.2 ssd's dismay.

All of this was done on the board I exchanged.
I now have a completely untouched fresh board installed with fresh windows and it is still doing the exact same issue (No lights, same constant error).
I am unsure how to proceed.

The physical board has a "rev 1.03" written under the name.
It is currently sitting with stock BIOS 407.
It currently is sitting with Driver 1.0.0.13, as per the "auto download Ethernet driver" that the z490-g does when you turn on a fresh install.

Please. Someone.

Tell me HOW to update this thing for success and HOW to make sure I NEVER have to mess with this again?
What is the issue with this port, and will this board be a nightmare for the rest of my ownership?
How and When will this board be completely rid of this bug/hardware(?) issue?

Im most unexcellent over here.
I need help.
Thank you.

I had somewhat similar issue and I couldnt use internet port, so did my update using the WiFi antenna, Since I see you didn't write it down on your post - After the v1.0.1.4 have to actually (shut down and *unplug the power cord* for a few sceconds then reboot the system normally)?... Then go and update Intel I255-V through Asus Armor Crate?

*Lian Li PC-011D (Black) *i9-10900K *ROG Strix Z490-G *Nzxt Kraken Z63/Corsair QL Series *Corsair Vengeance Pro RGB 64GB (4x16GB) DDR4 *Corsair HX1200i *EVGA GeForce GTX 3080 Ultra FTW3 *Samsung 970 Evo M.2 1TB *Samsung 960 Evo M.2 500GB *Samsung 840 Evo Series 1TB SSD *Asus ROG Swift PG43UQ *Corsair K70 RGB *Corsair Dark Core *Corsair Gaming MM800 *Corsair ST100 *Razer Nari Ultimate.

Shamino · ‎06-18-2020

criskoe wrote:
Yeah I unfortunately followed the order as per the instructions the first time. I made sure to do just what it asked.

But I just tried again following the links you sent as well. Followed instructions to a T. And well still same results. Switching the Ethernet cable back n forth between the Aquantia 10gb and the intel I225-V Gives wildly different results. I can replicate this over and over back n forth.

same router same test couldnt replicate

sebagsm · ‎06-18-2020

hi!

found some probs with xii hero with ram compatibility...

so on the site stated that F4-4800C19D-16GTRS is supported BUT there is no such ram 🙂

the correct one is f4-4800c18d-16gtrs BUT this is recognized in bios in xmp profile as 4807mhz ram and ofc its unable to boot in OS

tested on bios v0607. maybe some suggestion or some beta bios? thanks

SimselOr · ‎06-18-2020

sebagsm wrote:
hi!

found some probs with xii hero with ram compatibility...

so on the site stated that F4-4800C19D-16GTRS is supported BUT there is no such ram 🙂

the correct one is f4-4800c18d-16gtrs BUT this is recognized in bios in xmp profile as 4807mhz ram and ofc its unable to boot in OS

tested on bios v0607. maybe some suggestion or some beta bios? thanks

Same Problem here... but DDR4 4600 @ CL17 works well

GanjaHouse · ‎06-18-2020

With last firmware and update 1.0.1.4 Intel vs Marvel

criskoe · ‎06-18-2020

GanjaHouse wrote:
With last firmware and update 1.0.1.4 Intel vs Marvel

OMG! Thank you! LOL. Im not the only one experiencing this and Im not crazy! LOL.

Unfortunately Ive tried absolutely everything to fix this.
1. Redo firmware and drivers.(Did correctly first time though. Followed instructions properly but still tried again)
2. Reset Network
3. Tried different cables
4. Reset and upgrade RT-AC86U firmware.
5. Removed RT-AC86U and go direct isp modem
6. Different Advanced settings like Link speed
7. Install fresh windows V.2004 Drivers only
8. Install fresh windows V.1903 Drivers only

Ive also reached out to asus support and have shared my results and testing with them but it seems I keep getting a different person responding to my ticket everytime. And they keep posting the bare min simple troubleshooting steps like "check cable" "reset network" "reinstall drivers" "Check DHCP" and Exchange motherboard if all troubleshoot can not resolve the slow internet issue.

So it seems that they dont believe there is a bug or firmware issue and we have defective boards. And of course replacement boards right now are no where to be found 😞 Please reach out to asus support and open a ticket regarding this. Maybe if others report this they will look into it more.

Asus Z490 stuff