Asus maximus XIII hero, Aida64 and Prime95

[susanto]

So I jumped from the Asus maximus X hero to the XIII version so far loving this motherboard. I have my 980 Samsung nvme in M2.3 because I didn't know I needed to go into the bios and activate the m2_2 slot if I have a 10900k which I do. SO I have it in M2.3. Am I losing any performance?

But on to this inquiry about stress testing. I used Aida64 to do a stress test and everything went well at 5ghz none of the temps hit above 80c but with Prime94 with "blend of everything" on the PC crashed in like 2 minutes. What's up? Is prime95 not playing nice with the z590 motherboards or is Aida64 not that stressful on the system? IF anyone has any suggestions on other stress tests I can use please let me know.

Thanks.

[bscool]

It is probably when it gets to testing small fft with avx that causes too much heat. It depends on how you have the bios set for power limits/temps etc. Few 10900k will be able to run small ffts at 5ghz unless a really good bin and on water cooling.

From what I know most dont use small fft and avx in prime95 to test anymore.