TUF GAMING Z490-PLUS XMP POST safe mode

[Daniel_Shaw]

Hi there

When i enable XMP on my settings, 3200mhz ram the bios wont post and goes into safe mode,

I have tried it manually set to 3200mhz with voltages etc still no avail.

Please advise, Kit I have is the CMT32GX4M2C3200C16

Thanks

[MoKiChU]

Hi,

Have you placed your RAMs correctly on slots A2 and B2 and not A1 and B1 ?

Did you try the XMP 2 mode (the XMP 2 respect default XMP timings, while the XMP 1 optimise XMP timings) ?

[Daniel_Shaw]

MoKiChU wrote:
Hi,

Have you placed your RAMs correctly on slots A2 and B2 and not A1 and B1 ?

Did you try the XMP 2 mode (the XMP 2 respect default XMP timings, while the XMP 1 optimise XMP timings) ?

Hi Sir

You are a genius, I had the ram in A1 B1 moved them over a notch each and XMP 2 working a treat now 🙂


Thank you