cancel
Showing results for 
Search instead for 
Did you mean: 

ROG STrix B650-A wifi plus white 7600X first boot issue

PaxTemplar
Level 7

having a bit of a nightmare with building my daughters first pc for her xmas.
as stated above it's an rog strix b650-a wifi plus board in white and an 7600X cpu with an rtx 4060.
all put together and power is good however the Q-LED is stuck on  the CPU light.

tried reseating the CPU, made sure RAM was in A1 + A2, m.2 mounted ok, checked all cables , checked psu with psu tester for a pg signal which is at 300ms.
the PG could be ok but apparently can be "borderline".
any advice to get this thing up and running for xmas day would be great.
many thanks in advance

197 Views
2 REPLIES 2

achugh
Level 14

@PaxTemplar I could not find any board with name "ROG STRIX B650-A GAMING WIFI PLUS" but I was able to find "ROG STRIX B650-A GAMING WIFI". According to your manual for a 2 memory sticks, the memory needs to be installed into A2 + B2 and NOT A1 + A2. See PAGE 1-5 of your User Manual.

I hope this helps your resolve your issue.

Disclaimer: I am not an ASUS support person so my information may be incomplete. Always follow official documentation and material provided by ASUS representatives.

INTEL i9-14900K / CORSAIR VENGEANCE RGB 192GB (4x48GB) 5200 CAS38 / ROG Z790 DARK HERO / ROG TUF GAMING RTX 4090 OC / ProArt PA-602 Case / SEASONIC PRIME TX-1300 ATX 3.0 / CORSAIR MP700 PRO 2TB PCIe Gen5 / CRUCIAL T500 2TB PCIe Gen4 / EIZO CG2700X

They are in the correct slots .

it's an Asus b650-a gaming wifi gaming wifi (white).

 The motherboard, CPU and PSU hey picked up on Friday and replacements arrived Saturday.