I opened up the side of my PC for the first time in a while. The project, replace an old Vertex SSD 256gig that I just use for storage with Samsung 970 2TB, and also switch out a small M.2 with a 1TB replacement - easy enough!
Note; my OS is loaded in RAID 0 to two other Vertex SSD’s.
To replace the M.2 I had to remove my GPU, all went well, replaced the Vertex, fine, until I tried to boot. I started with a B9 code and was taken to the bios, where I noticed that one of my boot Vertex drives was not showing in storage configuration. The new 2TB drive showed up ok. Checked SATA connections and rebooted to a A9 code. * Powered down, removed the GPU and rebooted, I arrive at an AE Code. Reinstalled the GPU, and replaced the SATA cable to the vertex boot drive, now got A9 and no monitor.
I am at a loss why all this can happen and have tried everything within my knowledge.
I have no PC which I also use for work, so please help!