Rampage V Edition 10, RGB Headers

[chinky]

I got the NZXT RGB strips when i bought the NZXT Hue+ and got an extra extension strips.. I plugged it in on the RGB header but it wouldnt light up. Anyone know whats wrong?

[Zka17]

Make sure that the NZXT stuff is supported by the Asus board...
Also, you can check the plugs - + and - are important for the LEDs...

[Chino]

The HUE+ RGB strips are not compatible with the RGB headers on the motherboard.

[IT_Grandpa]

You may want to look at Silverstone SST-LSB01 RGB Light Strip Control Box with 8 Port Signal Control. I'm going to try it out on a build that I'm putting together next weekend. I'll update once I've tried it.

[chinky]

IT_Grandpa wrote:
You may want to look at Silverstone SST-LSB01 RGB Light Strip Control Box with 8 Port Signal Control. I'm going to try it out on a build that I'm putting together next weekend. I'll update once I've tried it.

so this can make it compatible with the NZXT strips?

[IT_Grandpa]

chinky wrote:
so this can make it compatible with the NZXT strips?

I believe so. But I'll know more next weekend. All my parts should be in and I'll complete the new build.

Sent from my SM-N920V using Tapatalk

[IT_Grandpa]

I finished my build and the Silverstone worked almost flawlessly. You mad need to get some male-to-male adapters, because all the supplied cables had female ends. Fortuantly, I had a couple of these adapters on hand.

[Menthol]

CableMod LED strips work very well, they have magnetic or tap on strips and WideBeem strips, I have used these myself, if your case is steal I would try the magnetic mount so you can try in different locations