PRIME B650M-K BIOS 3035

[sg95]

The following error message appeared when I started the machine. I set the ram to. Expo I'm setting up (6000mhz). I had no such problem with the old bios (2613).

It only sometimes occurs, especially when I turn off the machine and turn it on the next day. Even then, it only recovers once on the first start and the after second-boot error message does not appear.

[achugh]

Hi @sg95 have you tried to CLEAR CMOS and then load the defaults using F5? If the system still exhibits this problem, you can try going back to your previous BIOS version and see if this problem goes away or not.

[sg95]

Because of the ram settings, I loaded the expo profile it; it only goes to 4700 mhz instead of 6000 mhz when I load it to the default f5. That's the problem.

[Silent_Scone]

Hi, is that because it loads up in safe mode after failing training? 

Can you specify what memory kit part number?

Please be aware that the PRIME B650M-K BIOS 3035 isn't an ROG line product so you may have more luck over on https://zentalk.asus.com/t5/english-community/ct-p/en

[sg95]

Yes of course, My memory kit part number is KINGSTON FURY 32GB Beast RGB DDR5 6000MHz CL36 KIT
KF560C36BBEAK2-32.

[Silent_Scone]

Set EXPO II and retest. This may contain more conservative sub-timings.