cancel
Showing results for 
Search instead for 
Did you mean: 

PLED pin issue

Hordin
Level 7
Hello
i have just bought a new rog x570-f motherboard , the PLED has 2 pins on the motherboard but my chassis connector is 3 pin socket , if i fit it , then the power button only has one pin , the system does boot like this, but every now and then it fails to boot ...... its not stable. The case is a lian li armorsuit , id rather not change it, any ideas please?
94 Views
1 REPLY 1

AS185
Level 10
Is the cases HDLED at least 2 pin? You need the power button & reset button attached. You might just have to go without PLED.