New build asus maximus v formula error with processor 3570

[xmrsamer]

Hello ,
I have problem with new build pc

MB asus maximus v formula
processor : Intel core i5 3570 not k edition
memory corsair 16 gigs 2133
asus geforce gtx 680
power.s antec 650
8 pin atx connected
-------
my issue when i installed processor on mb and get power start q code is always 00 i changed the processor and install new one intel pentium G630 everything is work perfect and i tried the ivy 3570 on another mb it worked perfect

i update my bios to 1408 but the problem is same
Help me please

[Xaanix]

not sure this is the right forum for this.

[Chino]

1. Disconnect all the cables (USB connectors, HDD, Audio, Power button, etc.) from the board.
2. Remove your CPU, GPU, & RAM.
3. Clear CMOS by taking out the battery.
4. Wait 5 minutes, then put it back.
5. Insert one stick of ram in the DIMM_A2 slot.
6. Insert CPU and its heatsink.
7. Reconnect only the power cables.
8. Power up the board using the Start button.

[xmrsamer]

Chino wrote:
1. Disconnect all the cables (USB connectors, HDD, Audio, Power button, etc.) from the board.
2. Remove your CPU, GPU, & RAM.
3. Clear CMOS by taking out the battery.
4. Wait 5 minutes, then put it back.
5. Insert one stick of ram in the DIMM_A2 slot.
6. Insert CPU and its heatsink.
7. Reconnect only the power cables.
8. Power up the board using the Start button.

i did all of that before but same problem ? ...

[Chino]

Which method did you use to update your BIOS?

[xmrsamer]

Chino wrote:
Which method did you use to update your BIOS?

from bios EZ

[Chino]

Just saw your other thread in the Maximus section. I see that you have the Corsair H80. You said the motherboard posted with the G630. Were you using the stock heatsink or the H80?

[xmrsamer]

yea i just use right now g630 and mb is posted and use H80

[Chino]

Ok. Swap the i5 3570 back in but don't use the H80 this time. Use the Intel stock heatsink that came with the i5. See if it posts.

[xmrsamer]

Okay .......