How does this cart look?

[Zanarisrobo]

How does this look?
Im a total noob when it comes to custom loops so i need some approval of this shopping cart. Also, what fluid do you recommend?
I do plan to put this into a phanteks enthoo primo

[kkn]

http://phanteks.com/Enthoo-Primo.html <- that one i guess?
what sort of cards are you puting under water?
do remember there are diffrence on TI and non TI and DCII on the layout and sutch.
IF you have the monney for it, take a look at this pump and see if it is of enny inmterest -> http://www.frozencpu.com/products/17488/ex-pmp-211/Aquacomputer_D5_Pump_Motor_w_USB_and_Aquabus_Inte...
its out of stock but you can mail them and ask when they get it in stock again?
and on that pump ( i listed ) you need a pump top.
and not shure on the one you choosed.
coolant, just use normal premixed coolant.
tubing, dont be afraid to get more then you need, bether whit leftovers then sit there and have to order more 😛
do you have a fan controller?
what fans was you thinking on using on that radiator?

[Zanarisrobo]

Im putting a gtx 780 SC under it, and i think it has the same layout as the reference one. I think i will use the pump i found as i found it recommended alot of places and i dont want to wait for them to get it in stock again :P. I'm getting 3 meters of tubing, i think it will be enough. I do have a fan controller and as for the fans i haven't quite decided. Recommend some will you? 😛

[Nate152]

You can mix metals with this coolant. http://koolance.com/index.php?route=product/category&path=58

[Antronman]

I would use one brand. Aside from an EK X-Top D5 pump. Best pump there is.

[abvolt]

Have you read this about swiftech waterblocks, It made me change my mind about getting a 2 gtx 780 ti classy hydro copper, swiftech makes those blocks also take a look..

http://www.xtremerigs.net/2013/09/07/evga-hydrocopper/

Don't get me wrong i'm not saying they are bad blocks it's just if i'm going to spend nearly 2k on vga's I want it right and im sure you do to..

[kkn]

i personaly have the eeloop-3 fans.
get fans whit high preshure not cfm.
mmh2o 1.x and abowe.
fans whit low start voltage.
if you have a fan controller whit lcd and temp on it.
take a look at the inline temp for monitoring temp on the water.

[Zanarisrobo]

So should i go with a waterblock from EK like this one?
http://www.frozencpu.com/products/21467/ex-blc-1549/EK_Geforce_GTX_780_Jetstream_VGA_Liquid_Cooling_...

[kkn]

EK-FC780 GTX Jetstream is a high performance full-cover water block for Palit- and Gainward custom PCB design GeForce GTX 780 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list! <- as stated in the page.
go to EKWB and to their compatibility calk/list and look up your card and see what you get.

[Zanarisrobo]

Ok i changed up some stuff



Is this any better? 😛 According to the description and compability guide the GPU waterblock should fit on a 780