Help!?

[EXILE157]

Hi' everyone and thank you for taking the time reading and helping me with some info here.

- I don't ever O.C as I have no knowledge in that field, so I leave that to the professionals.
- I have about 2 months at most with my newly build gaming rig, specs can be read from my Signature Tag.

- Everything seemed fine until today 12/3/2017...I went to power up the system and immediately after turning on the power button the system shuts down? I repeated this steps a few times.

- I turned the switch off / unplugged the PSU and waited for awhile / I plug it back and turn on the switch, immediately the system turns on without me hitting the power button? I repeated this steps a few times.

- I then doubled checked all the cables / reseated the memories / I powered up the system now everything seems to be on and running, then I notice the GPU is lit up, but the fans are not running?

- I took out the GPU nothing changed, I then took both GPU out and again same thing everything else is running fine, but I noticed on the MoBo a (CODE 00)!?

- I had no GPU, no Memory and still the MoBo reads (CODE 00)?...Yet the NZXT CPU Cooler is running all fans in the case running?

- The MoBo is just stuck on (CODE 00) no matter what I do.

The issue I'm having is a (CODE 00) "Not in Use" > according to Manual.

I don't know what to do at this point, RMA? this 2 month in use Mobo?

[EXILE157]

WoW! 90 Views 0 Replies....Great Forum.

[Chino]

The 00 QCODE can be caused by a lot of things. Start with loosening the screws for your heatsink a little. Also make sure you have installed your memory and GPU. If the system still halts with a 00 QCODE, proceed to check which QLED remains lit. 🙂

[EXILE157]

Chino wrote:
The 00 QCODE can be caused by a lot of things. Start with loosening the screws for your heatsink a little. Also make sure you have installed your memory and GPU. If the system still halts with a 00 QCODE, proceed to check which QLED remains lit. 🙂

I already found out the issue, my cousin has a X99 board with same CPU, so I swapped it for testing and right away the same results came up on his Mobo (CODE 00) my CPU is dead!....RMA.

Thanks for the reply.