first build advice

[adicc]

this is my first build need some advice on what i have picked out if all looks good and what kinda fans and rads i should use also i have a caselabs th10a

http://ca.pcpartpicker.com/p/KPQQcf

[MeanMachine]

I can't see nothing wrong with this build asicc and Good Luck.

Just be very careful when installing the CPU, and make sure to very carefully tighten cooler support brackets evenly, as with that socket it is easy to bend the pins on the CPU.

Have you chosen a case to put it all into yet?

[kkn]

case is a caselab.

memory. do 2x8 kit if its cheeper.
and that hdd will make noice when it spinns up.
are you going to switch out the fans in the case or the cooler?
the h105 comes whit 2 fans.

[adicc]

will i plain on putting Scythe Gentle Typhoon in the case and a custom water cooling loop

[kkn]

fann: go for mmH2o in stead of cfm, this is becouse of the preshure a fan can push tru a radiator.
1.x mmh2o and upwards is best.
radiator: 2x 120mm ( 240 radiator ) fan slot for each OC'd component in the loop.
so if you for example is going to put CPU and 1 GPU under water, you would need 4x 120 fan slot whit radiator space, 1 480mm radiator or 1x 360 radiator + 1x 120mm radiator or 2x 240mm radiators.

you need pump, you need tubing, you need fittings, you have to have the case for it all to fit inside.
is it the caselab magnum case you are going to buy?

[adicc]

Yea it's the case labs th10a and I'm going a little over board with this build I hope to do dual loops an using 480 rads can't remember if thst the size

[kkn]

480 = 4x 120mm fan slot.
one loop for CPU and one for GPU/GPU's?

[adicc]

Yup one loop for CPU and sli gpu

[adicc]

so what kinda rads and fitting should i get like what company is good

[adicc]

could someone till me what kinda fittings i should get and what rads and fans