Crosshair VI Hero and Vega 64

[Gazza_65]

Hi Guyz….

Please could anyone suggest a way around installing 2 ASUS Vega 64 cards onto a crosshair VI Hero

I know it's probably overkill and not necessary however....

I have installed them into PCIE 1 and 2 at the moment as there is no way to fit the card into slot 3

Due to the USB Headers there , the card just wont fit..

I'm a little concerned that the 2 cards are too close to each other in slots 1 & 2 .

Any suggestions would be appreciated , eg: some sort of adapter plate ?

Thanks in advance for your answers / suggestions

Regards Gazza_65

[panzlock]

That's probably the only way to mount them, slots 1 & 2 without obstruction. Lots of connectors south of the third slot.

[Gazza_65]

Thanks Panzlock.
Appreciate the reply.
Good luck with deploying your troops …...

[panzlock]

Word of advice:

Maintain good airflow inside your case and feed the cards plenty of fresh air and they should be fine. Monitor your temps and adjust accordingly.