Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Asus ROG Huracan audio issue sound noise

I've bought recently Asus ROG Huracan G21-CX and I have a problem with audio. There is some noise in the front panel (headphones). It doesn't depend on volume. Sometimes it's stronger when I use mouse. I've read about some similar issues and cannot f...

No display after post

PC SpecsAsus z390 E MotherboardI7 8700kGTX 1080G Skills trident z rgb (2 8gig sticks)Samsung G9 MonitorGot a new M.2 ssd to replace the one my OS is on. Installed it in the 2nd m.2 slot and did not remove the one with the OS on it. I was going to cha...

TUF GAMING Z490-PLUS - 10900K pcie lanes

Hi AllDoes anyone know if using both NVME slots, especially the 2nd one will slow down the GPU on this board (tuf gaming z490 plus) I have 10900k and a 2080 ti and I plan on getting a 2nd nvme drive. Im not sure how the pcie lanes are routed on this ...

fastest 128 GB RAM kit for Dark Hero?

The fastest 128 GB RAM kit on the Dark Hero QVL is the HX436C18FB3K4/128 kit. I bought one but it turned out to be fake (on Amazon by Amazon, not a 3rd party), and it's now out of stock everywhere. But perhaps this is an opportunity, since I heard ...

coyote2 by Level 7
  • 891 Views
  • 1 replies
  • 0 kudos

128GB Vermeer RAM support >2666?

I'm very interested in the Crosshair VIII Dark Hero. I want the fastest X570 128GB RAM support I can find. This board's Memory QVL isn't up yet, let alone for Vermeer.To be honest, if it's gonna have the same Memory QVL as the rest of the ROG Cross...

coyote2 by Level 7
  • 1491 Views
  • 5 replies
  • 0 kudos

Sata controller card in Rampage VI Extreme Omaga

I'm trying to get two Sata expansion cards to work in my Rampage VI. The drivers on the controllers are good and I can see/use the HDDs and SSDs once the OS is loaded. The controllers are Startech and Syba both controllers are 4 port Raid compatible...

Joe45 by Level 7
  • 597 Views
  • 0 replies
  • 0 kudos

Is this a ,,normal" level of IPS GLOW?

Hi!I just want to hear some opinions about this level of IPS GLOW, the monitor is ASUS VG249Q and this is the photo of the glow (taken with my S20 - set to 200 ISO)and this one with 100 ISO (this one is closer to what I can actually see)This is my fi...

ProDyx by Level 7
  • 697 Views
  • 0 replies
  • 0 kudos