Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Strix x590 will not boot with XPM turned on. I'm using Corsair Vengeance Pro 3600 MHz 16GBs Error msg. says UEFI is running in safe mode. boots fine without XMP on. but runs at 2133HMz.
This is my situation:I own a Maximus Hero Z690, with a i9-12900ks and 64gb RAM 5600 DDR5 Corsair CMT32GX5M2X5600C36 (16x2) x 2 kits (that means all 4 slots used).RAM settings history:- In the past and with previous Bios updates, I just could reach 52...
I am attempting to add a simple PCIex card that will provide 7 additional USB 3.0 ports but running into problems. I suspect there is a setting in the BIOS I need to update. Perhaps to slow the PCIex16_3 down for a generic card? Are there BIOS s...
Hello dear rog support I will be short and quick, and since last night that strangely my pc no longer recognizes my mouse (via USB) while via Wireless yes, now I would like to know why this happens to me if everything worked perfectly the day before?...
Once installed and stuck down with the 2way sticky tape, how do you remove or exchange it with a larger drive? Those things are stuck pretty tight...
I own an Asus PN-51 micro-itx pc. I want to power it up by pressing on a single key on the keyboard. I looked through all of the BIOS and I could not find any keyboard startup funtionality. Can anybody in the community please confirm to me if there...
Hi peopleI recently got an Router RT-AX92Uan amazing router by the wayI saw a video time ago of a person upgrading to a beta firmware to get wireguard VPN client capabilitieshow I can do that?
I've been searching crazy in reference to these two questions and I'm hoping someone can help out a newbie with this board.#1: When I go to Start and click on Shut Down I'm expecting the entire computer to shut off. Meaning, no lights on inside, an...
I am at a loss. At first I thought it was the PSU. It was an 850watt. I have both the 4pin and 8pin CPU plugged in and was not getting anything. When I bumped it up to 1000watt, I get the LEDs over the back panel to light up as soon as I add passive ...
I'm using this card for At&t 2 Gig internet i'm not having any problems with this card other than my pc can't see the current firmware and it won't update to the new fimware as seen in the pic below. I tried the firmware from Asus wedsite and Marvell...
