Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
I am trying to secure erase the 3 ssd drives to freshen up the system. This technique brings the ssd back to factory fresh and increases write speed. In order to do this with Parted Magic, I need to change the mode from RAID to AHCI. I cannot seem...
Hi, I can't see under the 1402 BIOS -Advanced -PCH Stor. Config. -Sata Mode Selection the RAID option or any other place except EzMode, showing it but doing nothing. The SATA mode displays only AHCI.Is anywhere hidden the raid configuration on this B...
I have a new build with a new install of Windows 11 which pauses every minute or so. Whatever I am typing will momentarily stop typing and then catch up. If I am scrolling, then the scroll pauses and then catches up. If I am gaming, momentary pause o...
Hi pc:12900K with NZXT KRAKEN X732x16GB DDR4 KINGSTON DDR4 3600MHZ in GEAR 1RTX 3090 Ti Gigabyte GamingAsus Z690 SSD 1 TB NVM PCIESeasonic 1300W PX Prime PlatiniumWindows 11Hi. I have an question. Today i get first freeze just before main menu pops u...
I have a Z690-f motherboard and when the PC sleeps the Ethernet shuts off and cannot wake on lan.**I’ve set the bios to allow wake on PCIe, updated the adapter settings to ensure wake on magic packet is on and energy efficient Ethernet is off, but no...
Strix x590 will not boot with XPM turned on. I'm using Corsair Vengeance Pro 3600 MHz 16GBs Error msg. says UEFI is running in safe mode. boots fine without XMP on. but runs at 2133HMz.
This is my situation:I own a Maximus Hero Z690, with a i9-12900ks and 64gb RAM 5600 DDR5 Corsair CMT32GX5M2X5600C36 (16x2) x 2 kits (that means all 4 slots used).RAM settings history:- In the past and with previous Bios updates, I just could reach 52...
I am attempting to add a simple PCIex card that will provide 7 additional USB 3.0 ports but running into problems. I suspect there is a setting in the BIOS I need to update. Perhaps to slow the PCIex16_3 down for a generic card? Are there BIOS s...
Hello dear rog support I will be short and quick, and since last night that strangely my pc no longer recognizes my mouse (via USB) while via Wireless yes, now I would like to know why this happens to me if everything worked perfectly the day before?...
Once installed and stuck down with the 2way sticky tape, how do you remove or exchange it with a larger drive? Those things are stuck pretty tight...
