Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

DWM.exe high GPU usage.

Has anybody experienced high GPU power consumption from DWM.exe and fixed it? I've tried most of the suggested fixes out there to no avail. I wonder if it could be a BIOS firmware or driver issue? I'm using the Z790 Hero with BIOS 0703. 

DWM.exe.jpg

Q-Led

Hello,I apologize for my English. I am not a native speaker.As you know, the Q-Led system on the motherboard displays the CPU temperature after it boot. Is it possible to configure the Q-Led to show a specific temperature? For example, CPU package te...

Zazanas by Level 7
  • 473 Views
  • 1 replies
  • 0 kudos

ROG STRIX GL703GE-AS74 no power lights/won't start

HELP! (I posted this in the wrong place, so I'm posting here and deleting my other post)I have an ASUS Rog Strix GL703GE-AS74. It is a great laptop and was working fine, but one of the fans stopped working, so I ordered a replacement module with both...

Led Controller

Hi i was just wondering, is it possible to somehow synchronize led strips with a computer? I have a tuf gaming b560 plus wifi motherboard and I would like to control the lighting in the whole room via the asus aura. Any advice or suggestions would be...

Z690-F Gaming Wifi and Trident Z5 6400 DDR-5 RGB

I have a kit of 2x 32GB and putting these in was a nightmare: using auto settings in slots A2 and B2 was the only stable setting I found, but the RAM speed was set to something like 4000 and the timing settings around 40. Manually entering values aft...