Hardware & Build Advice
Hardware & Build Advice
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

rog z490-e gaming and f4-3866c18d-32gtzr

Trying to get this memory (f4-3866c18d-32gtzr) to run at something other than 2133, the 3866 would be optimal. I found it on the supported memory list on the Asus site for the board.But on the G.Skill website it doesn't list the board on the QVL for...

Motherboard Boot/Post error code 79/7F

I have tried many solutions as in replacing the CMOS battery. I have tried to reset the bios too by clicking the CMOS button on the back panel as well. I tried all slots of the ram but it wasnt the ram. For if I did remove the ram my speaker would be...

CL0VER by Level 7
  • 1 replies
  • 0 kudos

Crosshair VIII Dark Hero AIO cannot connect?

I have an awesome Dark Hero board and also an Artic Liquid Freezer II 360 A-RGB AIO that I am looking forward to using with my new 5950x. My problem is that this MB seems to not follow normal cooler attachment procedures based on common connectors.C...

[P5QL-E] Realtek Audio Console does not work

I have an old motherboard that still remembers the 2008 P5QL-E.When installing the Realtek HD Audio UAD driver, it installs, but the application downloaded from the Microsoft Store - Realtek Audio Console - no longer works. After enabling it, in a mo...

Maximus IX Extreme, Water Cooling QA

I picked up a Maximus Extreme IX, and it's my first open loop build. For ease of use, I picked up a coolermaster masterliquid maker 240.I tested the motherboard before attempting any water cooling, and everything started up and got to bios.I then in...

Horyd by Level 7
  • 0 replies
  • 0 kudos

ROG Strix LC240 RGB Fan Connectors

Hi! All - I am running Win 10 Home 64-bit on an ASUSTeK Prime 270-P and an Intel i7-7700K/4.2GHz. I recently replaced my old CPU cooler with the LC240 RGB cooler. and discovered that I do not have a dedicated RGB port on my MoBo. So I went on-line an...

gpbarth by Level 7
  • 0 replies
  • 0 kudos

Asus Dark Hero pump speed

I'm going to buy a new rig with the Asus Dark Hero and an EK D5 pump. In BIOS what are the options to set pump speed, I know control can be either disabled leaving the pump at 100%, but the pump is 4.8K rpm so would be very noisy. Also a speed curve ...

arconz by Level 7
  • 0 replies
  • 0 kudos