Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Is this good enough?

Posted: Tue Apr 03, 2012 11:29 pm Post subject: Is this good? Case: Antec DF-85 Black Computer Case With Side Panel Window Storage: OCZ Agility 3 AGT3-25SAT3-240G 2.5" MLC Internal Solid State Drive (SSD) Processor: Intel Core i7-3820 3.6GHz (3.8...

Nexor by Level 7
  • 11839 Views
  • 19 replies
  • 0 kudos

ATX Intel Z77 Mobo

I am starting to plan out a new build and would like to use the new Intel Z77 Chipset and was hoping to do another RoG build, but was wondering if anyone knew if Asus was planning a standard full ATX board with the Z77 chipset or not, the only board ...

need a little help with my build

well first off i'm new here this is my buildasus crosshair V formulaamd phenom II8gbx2 corsair vengance ram400gb wd hdd250gb wd hddthe problem i'm having is that i can get into bios and to the boot menu. Once i choose cd it runs xp setup for a bit t...

First time builder seeks memory/hard drive advice

Hi, everyone!So here's what I'm pretty confident in (though tell me if you see anything wrong, I can still exchange things):Rampage IV Extreme 2011Intel i7 3930KNoctua NH-D14Win 7 64 UltimateCooler Master Haf-X caseGeForce GTX560ti 448-pin (my monito...

SSD's Questions

I'm looking at finally purchasing an SSD, but I'm stuck as to which one to go for. The criteria I've set is:1) 256gig's or larger.2) Priced under $350 USD.3) Reliability and Performance.I don't want to be saddled up with an SSD that's too small for m...

Water Cooling Question - Tube Diameter

I am confusing about the tube diameter. For example:G1/4" - 1/2" vs. G1/4" - 3/8"By using the same pump and radiator, which one will provide better cooling result? or they perform the same?

Eustia by Level 7
  • 6931 Views
  • 4 replies
  • 5 kudos

RAM for rampage IV

hallo. i'd like to put 8x8Gb ram on a rampageIV. is there any thing i should know to chose RAM correctly? i mean, if i take 8 similar 8Gb dimm is ok or do i need to buy a pre compiled 8x8Gb offer, or i do need special things to look at?thanks.(hey, i...

first wc setup with asus maximus extreme iv z

Hey all,I am putting together my first watercooled setup and had a couple questions, I have a Maximus Extreme IV Z motherboard and I notice a very very slight sag on my EVGA GTX 580 Hydrocopper. I checked all my standoffs on my Corsair 800D case an...

7389
Dimsum by Level 7
  • 4043 Views
  • 3 replies
  • 0 kudos

New computer wont get pass bios?

When i start up my pc i get the bios, but then when i restart it goes to startup repair and after waiting for it multiple times it says it cant fix the problem. i try to select start windows normally instead and my computer just shuts down. what coul...

UnAssisT by Level 7
  • 12049 Views
  • 15 replies
  • 0 kudos

maximus iv gene-z/gen3 watercool advice

hi guys, a newbie here in relation to watercoolinghelp to what the best watercooling system to "fit" in my assembly. and what would be the the best assemble or just by a kit.Here is my specs..MOBO: Maximus IV GeneZ/Gen3Memory: GSkills Sniper 8gb (4x2...

yahj_20 by Level 7
  • 5287 Views
  • 2 replies
  • 0 kudos