Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

[INFORMATION] Secure Boot : Windows UEFI CA 2023 Update

Hi everyone, https://support.microsoft.com/topic/1db237d8-9f3b-4218-9515-3e0a32729685https://support.microsoft.com/topic/a7be69c9-4634-42e1-9ca1-df06f43f360d - Secure Boot Windows UEFI CA 2023 Updater | Download : Link Check/Update Process :Check W...

MoKiChU_1-1761233314470.png
MoKiChU by Level 40
  • 22081 Views
  • 53 replies
  • 16 kudos

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

What last parts to get?

Okay. I have a dilemma. And in bad need of expert advise. I am building a gaming system I have the CPU .Intel Core i7-2600K Sandy Bridge 3.4GHz . I have decided to install the Maximus V Formula mother board.Ill be using CORSAIR Vengeance 8GB (2 x 4GB...

New Build getting BSOD

Hello all. I've kept everything on this build at stock settings, except for my cpu which is OC'd to 4.6 using the motherboard's stock overclock settings. I get a BSOD occasionally. How do I test for what is causing it?PSU: Seasonic 1000w PlatinumGPU:...

EZ-plug 1&2: Need pinout

Maximus V Extreme:Plug 2:..........Plug 1:......Anybody care to share the actual pinouts? _Top_......... _Top_ 1../.............1..4/ 2../.........[ ..2..5/ 3../.............3..6/ 4../My guess is Plug2: 1=+12, 2=gnd, 3=gnd, 4=+5; Plug1: 1,2...

HyLite by Level 7
  • 5478 Views
  • 5 replies
  • 0 kudos

Problems fitting my mobo

So I just got my maximus v formula board yesterday and I started building my new pc right away, but I ran into a problem. The board is just a little too wide to fit with the standoffs in my HAF X. I ended up taking off the I/O shield and pulled off t...

Ardox by Level 7
  • 4325 Views
  • 5 replies
  • 0 kudos

First time PC build - Good enough for any game?

Hello fellow gamers and PC enthusiasts!Long story short;I'm a student at Murdoch University in Australia, and I won a few scholarships worth up to about $4,000 AUD. Now, I'm spending roughly $2,500 give or take a bit, in order to build a pure bred ga...

TeddyK by Level 7
  • 5947 Views
  • 9 replies
  • 0 kudos

upgrading from a 60hz monitor to 120hz one ? worthy?

Heya Guys . been thinking of upgrading my monitor to a 120hz one is it worthy the money or there is no real or noticable difference between em ? my current monitor is Samsung B2330 Full HD monitor Can u recommend me a good monitor to buy if it's wort...

Ezioo by Level 8
  • 8562 Views
  • 11 replies
  • 0 kudos

Msata III or SSD for Operating System

I purchased a 120 GB Muskin msata III ssd and a Samsung 830 256GB sata III SSD. I want to keep my operating system separate from my games and other data and that’s why I went with that msata. on the threads and online research people are advising to ...

Upgrading cpu cooler, closed vs open wc

Hi, I'm in a need for a better cpu cooler and I'm looking around and can't decide between the h100 or a custom loop. I will be going with a res -> Pump -> CPU -> Rad -> Res setup if I'm going with the custom loop, I might also wc the gpu when I have ...

Krindor by Level 11
  • 13447 Views
  • 27 replies
  • 0 kudos