Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Q-Led

Hello,I apologize for my English. I am not a native speaker.As you know, the Q-Led system on the motherboard displays the CPU temperature after it boot. Is it possible to configure the Q-Led to show a specific temperature? For example, CPU package te...

Zazanas by Level 7
  • 418 Views
  • 1 replies
  • 0 kudos

ROG STRIX GL703GE-AS74 no power lights/won't start

HELP! (I posted this in the wrong place, so I'm posting here and deleting my other post)I have an ASUS Rog Strix GL703GE-AS74. It is a great laptop and was working fine, but one of the fans stopped working, so I ordered a replacement module with both...

Led Controller

Hi i was just wondering, is it possible to somehow synchronize led strips with a computer? I have a tuf gaming b560 plus wifi motherboard and I would like to control the lighting in the whole room via the asus aura. Any advice or suggestions would be...

Z690-F Gaming Wifi and Trident Z5 6400 DDR-5 RGB

I have a kit of 2x 32GB and putting these in was a nightmare: using auto settings in slots A2 and B2 was the only stable setting I found, but the RAM speed was set to something like 4000 and the timing settings around 40. Manually entering values aft...

ROG Z11 wont boot

I put the pc together outside of the case to make sure everything worked fine and it did. Then when I put it in the Z11 it doesnt boot. Lights turn on and case fans spin when plugged in but when the power button is pressed cpu fan starts to spin then...

Leon713 by Level 7
  • 298 Views
  • 0 replies
  • 0 kudos