Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Hey ya'll! I have a rog strix z690-i itx mobo and I was thinking of getting the corsair dominator titanium memory. However, it isn't listed as compatible in the qvl. Will it work with my setup? The platinum is listed, just not the titanium. Apparentl...
It is now 2025 and still there is no solution to being able to use both M.2 with this motherboard. A user also still CANNOT enter BIOS while two M.2 are installed. This is beyond ridiculous. Has anyone been able to get two M.2 into this motherboard -...
There is a click when turning on and off the PC, 1 time. Is this normal?
Hi guysI have an 11 year old computer which runs really well. It currently has 16gb ram. I wanted to upgrade to 32gb so I got another 2 sticks of the same ram. I slotted them in but neither the bios nor the os sees it. If i log into the bios into SPD...
I bought i second hand Apex Encore used with my 14900k and a brand new GSkill 6000cl26.I mounted today and started and i got this 99 code from beginning. I searched info about, I see that some people solve the problem by plugging the usb for periphe...
I have a b550-e board and updated the bios before swapping my CPU’s. I went from a ryzen 7 3700 to a ryzen 9 5950x and get the D6 code instantly on boot. When I swap back to the 3700 CPU it runs fine. HELP PLEASE AND THANKS!
Hello!Laptop: ASUS ROG Strix G713IC-HX010Processor: AMD Ryzen 7 4800H with Radeon Graphics, socket FP6BIOS: AMI v. 329Northbridge: AMD Ryzen SOC rev. 00Southbridge: AMD FCH rev. 51Mainboard: G713IC (0x0000016E - 0x004F0A60)OS: Microsoft Windows 10 Ho...
Hello all,Finally got the case (Corsair 9000D) and put the system together and I cant get it to work.I am hoping you have ideas on what I may have missed.When I start the PC, I get the ROG display working and nothing else...It does not light up the Q...
Hi all,I just built my new setup and I find myself stuck at the Q code 15. I've tried reseeding the CPU, trying the memory modules in all slots, clearing CMOS with a single stick on A2, unmounting the GPU to no avail. There's no output and stays in c...
