Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Need Suggestion For PC

Intel Core i7 – 3770kASUS MAXIMUS FORMULA VG.Skill RipjawsX DDR3 2x4GB – 1600 MHzSeagate Barracuda 7200.14 1TBCorsair TX v2 650W or Cooler Master GX 750W This is what i have select ted till nowbut now i am currently confused with the (1) GPU, should...

Water Cooling question

I have 2 questions , Firstly if I have my Rad lower than my res and pump would it make bleeding easier? My Rad is currently at the top of my case and bleeding is always a mission.Secondly if I have a UV Led shining into my res, will it help keep my ...

xXx by Level 10
  • 4388 Views
  • 7 replies
  • 0 kudos

Rampage Extreme iv - CPU_FAN vs CPU_OPT vs OPT_FAN

Hi,Can someone help me with these definations and it's functions.CPU_OPT?OPT_FAN?I plan to install a CoolerMaster Seidon 120M.It has a radiator fan 4 pin wire and the cooler waterblock itself with a 4 pin wire also.Do I connect the radiator fan to C...

S_thian by Level 7
  • 3271 Views
  • 1 replies
  • 0 kudos

Maximus V Formula mPCI-E Wifi Card Help

Hello! Thank you for your help in advance! I have bought this board, and obviously it came with the included mPCI-E wireless card and the antennas. MY question is... how do you attach it to the card? Is it to be soldered? Or was it suppose to come pr...

KrazyKat by Level 7
  • 12783 Views
  • 5 replies
  • 0 kudos

watercooling the SB on a Maximus V Formula

I'm in the process of aquiring the components for watercool my pc, id like to throw a block on the SB and watercool it as well. But future plans for this loop will have me running sub 0c temps, are their any known coldbugs for cooling the SB and VRM...

soocold by Level 7
  • 2693 Views
  • 2 replies
  • 0 kudos

MSi R7990 Lightning GPU Issue

Hey guys!About 2 months ago, i built my own first computer. Everything is fine except for the graphics card. Firstly it seems to be too big for the case (Zalman Z11 Plus Mid-tower) and secondly, it doesn't fit 100%. Meaning maybe a bit more than half...

Team Group Ram

Hi everyone:Has anyone tried Team Group Ram products? I am looking to purchase the following ram. Also is this ram made by samsung?http://www.newegg.ca/Product/Product.aspx?Item=N82E16820313243Thanks

samual by Level 11
  • 5502 Views
  • 4 replies
  • 0 kudos

Need some help with RAM issue

hi,this is my first time posting anything here..i recently purchashed a Maximus V Gene and with that the Corsair CMZ16GX3M2A1866C9first week i ran the rig it was all sweet and gooduntil i upgraded my GFX Drivers and then i started having BSOD'sreins...

Retired by Not applicable
  • 2536 Views
  • 4 replies
  • 0 kudos