Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Sound Card and New Mouse, Cant decide.

I have the Asus Rampage Extreme IV and the onboard sound is superb coming from my Intel Skulltrail. I was using Astro A40 but since Astro screwed me with 2 pairs off A50 wireless that arrived dead out the box, and then a further dead 2013 mix amp i m...

MAXIMUS VI FORMULA z87 <-> Cooler Master Hyper 412s

Hey guys,i am new to this forum. 1. I ordered a new system today but i forgot to check if the Cooler Master Hyper 412s fits to the MAXIMUS VI Formular board cause of that massive onboard cooling shield. I cant find anything in the web =/Would be nice...

Should I upgrade my memory???

Hello all! So I pulled the trigger and upgraded from the Saberthooth X79 with a i7-3820 to the Rampage iV Extreme with a i7-4930k. With the previous build I had 64gb (8x8gb) of Corsair vengeance 1600 DDR3 CL10 ram. Should I bother upgrading that to s...

watercooling

ok this is the pieace very important at the moment the watercooling kits so i have see this model of the kit1) RayStorm 750 EX420 WaterCooling Kit 2) Alphacool NexXxos Cool Answer 360 DDC XT Kit3) H20-320 Ultima HD, featuring a triple 120mm radiato...

New Build

Hi all, I have not been following the hardware for quite some time and planning to build a new ones in the coming days. In addition to web surfing and youtube, I will be gaming on FPS and photo editing with Photoshop on my 27" monitor at a resolution...

Trifire plus physx on c5fz?

hey. i am quite interested in physx lately, as i have maxed all other settings successfully for all games with this rig, including high levels of antialiasing, but still have issues with physx (as everyone who cares already knows). after looking into...

unmaker by Level 7
  • 13881 Views
  • 33 replies
  • 0 kudos

Anyone know of a good i/r receiver?

I have been looking for an infrared receiver for my build for a while now but can't seem to find what I'm looking for. I'm looking for a receiver that integrates into the front of the case so you can't tell it's there. I'm fine with modding my case i...