Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Push pull setup question

I have a Seidon 120V closed loop cooler. It comes with an ok fan. I was planning on purchasing two of these fans to put push pull on the radiator.http://www.newegg.com/Product/Product.aspx?Item=N82E16835553002 My questions are... What type of adapte...

Veracis by Level 7
  • 25733 Views
  • 41 replies
  • 0 kudos

PSU size

Finalizing my build, and unsure on PSU size, I'm putting the following in the build;Intel i7 4770k - overclocked16 GB G.SKILL 2133 RAM Trident X Formula VI MBCurrently a 650 ti GPU, but will be upgrading to either dual 780's or 780ti's.2 HD possib...

Need New Psu

Hello thereCPU: INTEL I7 4770K @ 4.5 GHZWATER COOLER : CORSAIR H100i MOTHERBOARD : ASUS Z87 DELUXE-DUALRAM : GSKILL TRIDENT 2X8GB 2400 MHZGRAPHICS : ZOTAC NVIDIA GEOFORCE GTX 780SSD DRIVES : 2X SAMSUNG 840EVO 120GBHDD DRIVES : 1X4TB RAID0 , 2X2TB RAI...

My first rig (GAMING), is this good?

Budget: [$3500 Main uses of intended build: Gaming in ultra high settingWill you be overclocking:YES using ROG Front Base Dual-Bay Gaming Panel if it will be release in the marketExtra information about desired system: Quiet as possible, No temperatu...

Looking for feedback on my new build

I decided to replace my 7 year old rig and before I click the buy button I would like to do a run down on my parts, maybe someone has a better insight whether I am making a mistake.ASUS MAXIMUS VI HERO LGA 1150 Intel Z87 HDMI SATA 6Gb/s USB 3.0 ATX I...

Upgrade advice needed.

Hello:Budget: $500USDMain uses of intended build: Eyefinity gamingParts required: Look below pleasePrevious build information (list details of parts): i5-2500k @ 4.6Ghz (h100i) , 16GB RAM @ 1600Mhz, Matrix R9-280x @ stock, PSU Corsair HX850, Motherbo...

Compatibility Check help please (Fitting)

I already have a draft of what i'm going to use in my rig but i'm not sure if my GPU will fit in my case. Sorry I'm new about pc building so please help me.Case: Corsair Graphite 760T http://www.corsair.com/en/graphite-series-760t-arctic-white-full-...

Triple monitor bf4 build advice ?

Hey all its time again for a new build as my current setup is just not coping with todays high demand games and the high ambient temps of my region have more than cooked the poor old girl more than just a few times with only air cooling tho it has se...

T1MMAG3 by Level 7
  • 5188 Views
  • 10 replies
  • 0 kudos