Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Need advice on a new cpu cooler!

Hello all,First off my basic Rig Info:CM Storm Trooper caseRampage IV Black Edition MOBO4960x Ivy Chip16G Ram dual channel(Kingston)Corsair H100i cooler (which I think is broken)Asus DCII GTX760 GPU500G SSD & I TB HDCorsair 1200 PSUSo I got my PC bui...

Ram Advice for RIVBE

Hi, just on a new build (4960x & RIVBE) and probably going with 1866 or 2133 MHz ram. What voltage would you guys lean towards, 1.5 or 1.65v for a quad channel 16/32 GB kit?Thanks!

My ROG Build

I'm building the computer today so there isn't much part changing to speak of. Does this make me ROG worthy??Cooler Master HAF 932 caseCorsair 1200w psuASUS Rampage IV Black Edition moboIntel i7 - Sandy 6 core 3.2giggawattzCorsair H 100i Cpu cooler2X...

scottp86 by Level 7
  • 6236 Views
  • 12 replies
  • 0 kudos

My first real ROG build

Hello guysI have been running on an ancient Core2 Duo E6750 build for ages now and all i have been doing with that over the last few years was some moderate OC'ing of the cpu and upgrading memory and gpu as time went by. Last upgrade was a ASUS GTX 7...

Would this work? :o

Hey guys just been dreaming lately about the most ultimate rig I could think of, and was wondering if it would work. Of course I don't have the money but hey it would be fun aye? Motherboard: R4BECPU: 4930kGPU: 3x GTX780ti Direct CUII in SLI (Asus)PS...

Nuimoa by Level 7
  • 3254 Views
  • 4 replies
  • 0 kudos

Air flow questions.

Hello all. I am looking for some advice on a new loop I'm doing. The case will be an Azza genesis 9000. The MB will be inverted so the gpu is at top. I have currently 2 rads:1x360 and 1x240 xspc non-slim rads (they are pretty think but can't remember...

Gene VII frozen in BIOS

Hey Guys,New to the forum but just completed my second PC build and seem to be stuck in the BIOS. When I power up I go directly into BIOS and have no keyboard or mouse functionality. I have not tried the reset button on the MOBO itself bc I do not fe...

Need a suggestion for Graphic Card

Budget: USD 800Main uses of intended build: For Gaming, Editing (Video/Audio/Photo), Word Processing, Video Surveillance and many other...Parts required: Graphic CardPrevious build information (list details of parts):- Intel Core i7 3930k- Rampage IV...