Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Poseidon vs. MARS 760

Currently buying parts for a build, and have narrowed things down. So far I'm using the following - Formula VI MB (Was going to use the Extreme, but I want to put the ROG Front Base in the case making the OC panel that comes with the Extreme a waste...

Potential upgrade bottleneck? AMD 1100T BE

I'm pretty sure I already know the answer to this but I wanted to ask others on the forum. I am about to upgrade my PC this weekend and I wanted to see how much at all I would be bottle necking my upgrade. Current SpecsCPU - AMD 1100T BE - currentl...

My dream build !!!

Hello guys im new here but i love asus products, this is my dream build. i want to hear some advices and suggestions about itLocation: Caracas, venezuelaCurrency: USDPurchase time: i dont have time yetBudget:8.000 of course i dont want to spend all.....

Kuroxyox by Level 7
  • 5017 Views
  • 12 replies
  • 0 kudos

About CoolerMaster V8 GTS

I have Rampage IV gene, and I am planning to put CoolerMaster V8 GTS as my cpu cooler (I choose it cause it look so cool) , and corsair dominator as my RAM.Now, Im wondering if theres no problem between the V8 GTS and the Rams, I mean does it fit w/o...

Best RAM and MHZ for Maximus V Formula

HiI have a Maximus V Formula motherboard in my new build ( currently still in progress) and have pretty much decided on Gskill RAM for it. And totalling 16 GB 2x8 GB .It will be using my i7 3700k cpu but i realy dont know what speed RAM to go ...

aeneon by Level 7
  • 2645 Views
  • 3 replies
  • 0 kudos

First time full build.

First I would like to say hello. This will be my first full scratch build. I want to go a little wild with this one. I'm basing this off the maximus VI Impact. I would like this to be a smaller build beings it will travel with me. Budget: $2-3000Main...

Is my build worthy?

Ok, so here I am finally with a build worthy of being considered in this forum, I hope. Been playing around with computers for many years so I understand the basics. I have finally built a quality machine that gives me some upgrade options down the r...

Using ROG connect

Hey everyone, I have a Asus Maximus V Formula board, I also have the Aquacomputer Aquaero 6 that I use to monitor my water flow and water temps as well as some other things. I want to start overclocking my rig but I want to monitor my cpu and board t...

Water flow and tempature monitoring

Hello everyone, I have recently finished building a new gaming pc and I installed a flow meter and tempature sensor on my water cooloing loop to monitor during gaming sessions. I cant find a monitor that I am happy with. I wanted the rog dual bay fro...

Air Cooling Issue and a odd question

Hello I am using a Noctua NH-U9B SE2. The cooler did not come with 4-pin fans, I used it for a bit with just 3 pin fans, then recently switched over to Noctua 90mm 4 pin fans. I have noticed since switching the idle temp is now around 32- 36ᴄ before...

Verum0 by Level 7
  • 2934 Views
  • 6 replies
  • 0 kudos