Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Computer just resetting

Hello,After some time it seems that something went terribly wrong with my system.In the mid of work or even doing nothing completely randomly from both load and time between computer simply resets. just PUFA bit before that I was getting asus q code ...

mirkoj by Level 7
  • 2550 Views
  • 5 replies
  • 0 kudos

Seasonic PSU X1050 RMA. Is there reason to be concerned..?

Hello,I am about to embark on my first ever RMA journey for a faulty Seasonic X1050 PSU.The RMA application has been accepted so I now need to send the unit as per the emailed instructions.I however have a number of concerns that I hope to get some a...

R8sM8 by Level 7
  • 5238 Views
  • 10 replies
  • 0 kudos

Recommended RAM: Gaming

I have been searching the internet lately for answers about recommended RAM for gaming.Yes, I will be mostly playing Blizzard games for now. I just finished my PC yesterday and I was curious if I had mistakenly bought 2x4GB for 8GB of RAM @ 3000MHz.M...

Fresh build need help with stability

I have the classic unstable frequent hard crash Crosshair Formula V Motherboard with the AMD FX 9590 CPU I've tried a few different settings and cannot fix the stability to save my life and as of this point I do not want to download to the 8350. Any ...

One Last Time Before I Build

Hi everyone, About two weeks ago, I posted on here looking to get some ideas on a parts list for my ultimate gaming rig. The time has come and soon I'll be building this. I guess I would like some last minute validation on the parts I have chosen. Wh...

980ti STRIX RMA Advice

Need some advice from people that have recently RMA'd this card (980ti STRIX) or an official reply would be most welcome.So basically my 980ti died other week, 99% sure is a memory failure:Symptoms are: Under Windows 10, with Nvidia driver card boots...

6700K clock spikes in GTA V - something wrong?!

Hi.When i am playing GTA V in windowed mode ,cpuz showing randomly weird cpu spikes to 800mhz from 4000mhz. Fps are not affected by the way.Screens ( open new tab to see with dip to 800mhznormal with 4000mhzTemps of cpu are ok 50C. 6700K stock no OC...

sde444 by Level 10
  • 1740 Views
  • 2 replies
  • 0 kudos

Still can't decide x99 or z170

Hello everyone, I'm a new builder here. Hope so I did not post on the wrong subforum.Currently I'm building my very first own RIG and what's left are only motherboard and processor.I don't plan on using the PC up until January 2017, so I still have s...

Geil White Dragon RAM and Lucifer V2 Compatibility

My main inquiry pertains to the Geil White Dragon memory sticks. Anyone know if they are low profile? They don't have any heat spreaders but they look a little taller than other RAM sticks. Would like some info if anyone has viewed these before, beca...

panzlock by Level 12
  • 1641 Views
  • 0 replies
  • 0 kudos