Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Hello all!I have been using H110 to cool my CPU for 3 years but now it doesn't perform like it did before.All of a sudden my temps increased, and now I am idling at 35-40 C @1.2Ghz 0.8V (i7-3930k 0-1% load), and 40-45 C @4.4Ghz 1.256V (0-1% load). Be...
Hello, I recently completed a build with an asus maximus viii hero (z170) motherboard. I have had a few problems with them build and wondered if you could address if any of the issues were normal or if they were indeed the result of a defective board...
Hi everyone,I recently purchased the ROG STRIX B250F GAMING Motherboard, along with a M.2 SSD, this one here: https://www.newegg.com/Product/Product.aspx?Item=N82E16820250081Today, when I assembled the computer and tried to install Windows 10, it was...
Hey all, this is my first post here so thanks for having me -I have just recently completed my first build, and while it went well I am having a few issues which I could use some advice with.Build Spec -Asus C6HRyzen 1800xCorsair H110iAsus Strix GTX ...
The SATA 3.0/600 specification is rated to support up to 6Gbps, which (after error-correction) equates to 600MB/s maximal throughput.I notice that the peak speeds offered by the fastest available SATA drives do approach but don't actually reach this ...
Hi guyI change my PC with an Asus X370 Pro + Ryzen 1700x.PC run great, but i cant use my Asus Essence STX II, i pluged it and into devices manager i can see it, but when i try to install the drivers or try to update the driver the PC reboot automatic...
sometimes when the laptop is under a load I see cpu temps get as high as 80c and around 46c to 50c at idle. I heard this is normal, I'm just double checking. I have the skylake i7 6700hq cpu.
Hello guys, I seem to be having trouble installing my M.2 SSD. I've followed every forum post regarding this issue, but every time I get to the windows install section I don't see my driver listed for me to install windows 10 pro on to it. Currently ...
Hey GuysJust needing some help here, trying to figure where everything gets plugged into on this Mobo.The corsair has 2 cables coming from it, one is a 4 pin that has another 4 pin split from it and a 3 pin cable. I know one of them should probably ...
Yesterday i went out and build a new computer, after putting it all together and booting up for the first time, I get no display and when i looked at my MB it shows a error 62 on the LCD, I switched to my MB graphic and still 62, i'm at lost any help...
