Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Help Please - LG 24MP59G-P Or Nixeus VUE24

I have a fair run down on these two, so here are my thoughts on why these...I plan on running an RX580 and want to game 1080p so I can play High/Ultra settings, I can't afford 1440p or higher gaming, and a 24" is big enough for me.I love color, quali...

SlackROG by Level 10
  • 3619 Views
  • 5 replies
  • 0 kudos

Crosshair VI Hero AM4 rear i/o shield

Hello All,I am looking for some advice here regarding my board. I just recieved the board (Crosshair VI Hero) from Newegg, bought it from an open box deal. Saved a bunch of money and the board is in fine working order. My issue is that it didn't c...

Questions on next vr build.

Looking to build my next pc and looking for advice and answers.Will use the same thread rather than create one per question.Building to run Oculus Rift. Not intending to overclock hugely at the start as new to it all and buying hardware so can in fut...

kwaka by Level 7
  • 1492 Views
  • 1 replies
  • 0 kudos

ROG Maximus VIII Formula

Hey guys, I'm new to the forum but I seem to be having an issue that I can't figure out. Really hoping I can get some help since I've tried calling ASUS and they can't really be much help to me at all. If I don't find any help I'll end up sending out...

Avantis by Level 7
  • 1347 Views
  • 0 replies
  • 0 kudos

new Asus GL502vm got heatsink scratches, dents??? help

Hi, I need some advice here. I bought a brand new Asus GL502VM from ao.com few days ago. I opened the back cover up to put a better SSD in and noticed these massive scratches on heatsink pipes. There are so many of them, the right side is worse, even...

66909 66910 66911

Question about connecting fans to motherboard

So I ordered an ARCTIC Liquid Freezer 360 with a 360mm radiator and 6 fans.On the Arctic website it states that each fan uses 0.25 A max. Arctic designed the fans so you can plug all of them into one free PWM connector on a motherboard, so that would...

These Parts - PSU Ok?

Hello,This is my build I'm looking at.ASUS ROG STRIX B250HSamsung 850 Pro SSD1x 120MM case fan3x 140MM case fansi5 7600KNoctua NH-U14SCorsair Vengeance LPX 16GB (2x8GB) 2133MHz C13XFX RX 580 GTR XXX Edition 8GB WhiteEVGA SuperNOVA 550 G2LG 24MP59G-PW...

SlackROG by Level 10
  • 8774 Views
  • 20 replies
  • 0 kudos