Hi,I'm not pluging any fans on the Fan hub of the Ryujin 2, i'd rather have my fan controlled on the CPU fan header and with Fan control software.Can i uplug the usb fan header ?Thanks
Hi all,I’m looking to build a new AMD rig with the X670e chipset. What is really unclear to me is how the pcie lanes are handled between the GPU and M2 SSDs. I would like to buy the Crosshair x670e Extreme version but when I look at the manual it loo...
I wanted to know can we install 2 gtx 3090 zotac trinity gpus in the crosshair 8 , Do i have to use a 2 way nvlink or 3 way . Can some one pls confirm .Also if i do install 2 gpus - How many M2 - Gen 4 NVME can i run with the systemCasing would be a ...
Hello, as the title says, I can't see how to read the Q-LEDs on the motherboard as they are covered by a plastic shroud it seems. Can that shroud be removed? My computer is completely dead and I can only see the Q-Code LED giving me codes 01, 20, 5...
Hello all...Today i realized, only 2 of those Dominator Platinum ist working at max speed (4000 Mhz).If i swap over those RAMs to the other slots, i only can get a maximum speed of around 3000Mhz with the sameRAMs. Is any other discover that behavior...
Has anyone found a PCI-E 4.0 riser cable with mounting holes which align with the mounting holes in the PSU shroud for the Helios case? There are a few 90 degree 4.0 risers out there (since the ROG one hasn't been updated), but I'd prefer something ...
Hey All, I just went through replacement of Z690 Hero with reversed capacitor. Went with a Z690 formula since replacement was not an option, only refund. System was working great for a week or so, but then noticed one of my memory sticks (2 x16 F5-...
Hi all, hope someone can help with my issue...I built my pc a few days ago and since I've tried to boot, it doesn't post and there's no signal to my monitor via the iGPU or the 3080 Ti.SpecsMB: Asus Z690 Maximus heroRAM: 128gb (4x32gb) g.skill Triden...
I am trying to secure erase the 3 ssd drives to freshen up the system. This technique brings the ssd back to factory fresh and increases write speed. In order to do this with Parted Magic, I need to change the mode from RAID to AHCI. I cannot seem...
Hi, I can't see under the 1402 BIOS -Advanced -PCH Stor. Config. -Sata Mode Selection the RAID option or any other place except EzMode, showing it but doing nothing. The SATA mode displays only AHCI.Is anywhere hidden the raid configuration on this B...
