Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

M.2 SSD temperature

Hello Everyone.On IX formula MOBO there is a cover, that covers the M.2_1 slot.AIDA64 shows that my ssd is 65 degree C in idle.I'm afraid, that it's going to be too hot when i'll start playing.I'm thinking about moving the ssd to M.2_2 port, that is ...

Links by Level 7
  • 72903 Views
  • 51 replies
  • 0 kudos

Motherboard temperature from 1-255 °C

I can see this anomaly in Aida64 quite often:The CPU temperature is also strange, but that's not the main trouble.But the VRM and Chipset temperature jumps between 1°C and 255°C, and I have no idea what could cause this. Of course during these jumps ...

66423

Strange PSU Issue!!

Hi guys,Long ago I had a discussion about this problem. I'm going to explain.Almost every time I turn off my PC, the power supply goes off, that is, everything goes off smoothly, but once I go to press the ignition key the pc does not start, I have t...

SharPPP by Level 7
  • 2793 Views
  • 5 replies
  • 0 kudos

Strange BIOS issue (Maximus VI Formula)

I recently converted from 2 GTX 670's to 1 GTX 1080 and cannot get the Maximus VI Formula PCIe slot 1 to 16X. I have no other PCIe cards installed yet the bios reports slot three as "Not Present" but slot 2 says 0x speed which is why I think that slo...

Rampage V Extreme and compatible RAM

Hi everyone,I recently started getting BSODs and after running Memtest86 it showed that my RAM modules were getting errors.I am running Corsair CMK16GX4M4A2800C16 (16GB 4x4 @2800 MHz) and thinking that if was to get a new set why not make it bigger a...

Did i burn out my PCI slots? Code 62 plus VGA LED.

UPDATE: Flashed the bios everything is fine. Thanks for reading!Hello everybody,TL;DR version: I hooked up four video cards to my Crosshair V Formula Z and now it won't boot giving me q-code 62 and a VGA LED indicator.The details:I have had my rig up...

ROG Strix 270H Secondary HDD preventing fast boot

I have a brand new system built around a ROG Strix Z270H, after reluctantly retiring my RIVBE. The main reason I'm upgrading is for the m.2 x4 slots and the reduced boot time that those bring. I installed a Corsair MP500 480GB, and the system fast bo...

Jay_K by Level 8
  • 2521 Views
  • 3 replies
  • 0 kudos

Asus Hero XIII and M2 SSD Evo.

Have running the Asus G20CB with the home-updated GTX 1080 Founders Edition and the I7-6700k for nearly a year now and it works GREAT with VR and must say its a really nice little beast with top performance but this moment updating the home built and...

Rampage V Ed. 10th does not detect a ram bench !!!

Hi guys,I have a problem.Today I've assembled all the pc with the mobo in the title. Once done everything, turned on, entered the bios all smooth row but says i have 12gb ram when i have 16. i put the ram as by manual asus, i have a 4x4 of RAM.Before...

SharPPP by Level 7
  • 1918 Views
  • 2 replies
  • 0 kudos