Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Hello all, and sorry for the vague title.I just updated my current X79 setup to an X99.. Rampage V Edition 10, i7-6850K, and 32GB of Corsair Dominator Platinum 2400 C10.After pulling my old motherboard and installing the new, and waiting several hour...
Hi!I just build my first pc and everything went smoothly. But...When I tried to plug my speakers into the front IO headphone jack the only sound I got was static noise. My motherboard registered that a speaker was plugged in and the static noise only...
Project Aura: I am building the system to encode high-quality 4K video, stream online, and gaming. Possibly all at the same time. This is the first computer a built in 10 years. I want it to be a quality PC that will last me a good long time. I am an...
Anyone know what the max safe amperage you can use on the w_pump header? Have a 3 pin DDC 18W that I am wary of hooking up until I know the specs. TIAS!
Hello All,Well I'm pretty Geek, but it's been a while since I've built a gaming box, and boy there are certainly a lot of choices out there.I like to keep it simple, and just have good ole performance and stability. I'm not into all the Bling and R...
Greetings,When I installed my Samsung NVme EVO 960 M.2 drive on my motherboard (HERO IX), I forgot to put in the stand off screw and started to screw the M.2 drive onto the board. I realized this and unscrewed it and put in the stand off screw and th...
Hi! I'm quite new into to this stuff but I wanted to reset my GL502VM for the first time and I have searched the forums a lot of times. I found out that recovery partition is like around 16GB and I have look trough my partitions and there are no reco...
I am unable to get my computer to boot or enter bios if I add a 2nd m.2 drive. i get the error below.
I have a HERO IX mobo and I'm installing windows 10 on a Samsung EVO 960 NVme M.2 drive. I've read you have to do a few things in BIOS before installing:1. Go to secure boot in bios2. Then under OS type, set to "Other OS"3. Then click on Key Managem...
Good Day, I recently purchased 3 radiators 2 x 480 GTR and 1x 240GTR this is for a Corsair 900d Case. Two of the radiators (bottom are of the case) are configured to use the recommended inlet/outlet port orientation. One of the 480GTR radiators (top...
