Hardware & Build Advice

I really need some Crosshair VIII EXTREME advice for drivers and bios?

Hey guys,It's been a long time since I've been in here. I switched to an Aorus X570 Master mobo for a while, and never was happy with it. I was all set to buy a Dark Hero board, when this EXTREME board monster fell into my lap for way cheaper than re...

Asus Maximus Z690 Hero Polymo Lighting Does not turn off (BUG)

Hello, when I turn off the computer, the polymo lighting lights stay on. Even though I turn it off from Bios and Armory Create, it always stays the same color in this way. Always stays on the blue lightBIOS Version 2004

X670E HERO Boot Times

Hello,I was wondering for those that have this board. What are you noticing for your boot times? I'm around 30-40 seconds. I wanted to see if this was normal or not. I've already completed the BIOS update from 9/26 (I won't do the BETA). I didn't cle...

I've read the manual, but....PCIex16 GPU and M.2 help needed

Hi all,I have 2 M.2 NVME drives10900kAsus Maximus APEX Z590EVGA 2080 Ti (340W power limit)So the manual has SOME information on the PCIe speed with certain M.2 configurations, but it is NOT clear if any of these M.2. slots, OR the DIMM.2, use PCH lan...

ASUS ROG Rapture GT-AX11000 mesh

Hi, I currently have a ASUS ROG Rapture GT-AX11000 running fine, however I would like to add a repeater or mesh as it is too weak in the further areas of the house.What would I need to expand that as a mesh? What products would be compatible? I can't...

Question about the Ryujin 2 fan Hib

Hi,I'm not pluging any fans on the Fan hub of the Ryujin 2, i'd rather have my fan controlled on the CPU fan header and with Fan control software.Can i uplug the usb fan header ?Thanks

New build - Asus ROG Crosshair X670e Extreme pcie lanes

Hi all,I’m looking to build a new AMD rig with the X670e chipset. What is really unclear to me is how the pcie lanes are handled between the GPU and M2 SSDs. I would like to buy the Crosshair x670e Extreme version but when I look at the manual it loo...

2 x RTX 3090 Zotac Trinity installation in Crosshair 8

I wanted to know can we install 2 gtx 3090 zotac trinity gpus in the crosshair 8 , Do i have to use a 2 way nvlink or 3 way . Can some one pls confirm .Also if i do install 2 gpus - How many M2 - Gen 4 NVME can i run with the systemCasing would be a ...

Z690 Maximus Extreme Q-LEDs covered by plastic shroud, how to read them

Hello, as the title says, I can't see how to read the Q-LEDs on the motherboard as they are covered by a plastic shroud it seems. Can that shroud be removed? My computer is completely dead and I can only see the Q-Code LED giving me codes 01, 20, 5...

Maximus XII Extreme not working with 4x 16GB Dominator Platinum @4000Mhz?

Hello all...Today i realized, only 2 of those Dominator Platinum ist working at max speed (4000 Mhz).If i swap over those RAMs to the other slots, i only can get a maximum speed of around 3000Mhz with the sameRAMs. Is any other discover that behavior...

Forum Posts

I really need some Crosshair VIII EXTREME advice for drivers and bios?

Asus Maximus Z690 Hero Polymo Lighting Does not turn off (BUG)

X670E HERO Boot Times

I've read the manual, but....PCIex16 GPU and M.2 help needed

ASUS ROG Rapture GT-AX11000 mesh

Question about the Ryujin 2 fan Hib

New build - Asus ROG Crosshair X670e Extreme pcie lanes

2 x RTX 3090 Zotac Trinity installation in Crosshair 8

Z690 Maximus Extreme Q-LEDs covered by plastic shroud, how to read them

Maximus XII Extreme not working with 4x 16GB Dominator Platinum @4000Mhz?

Can I use a non-ROG power supply with my ROG mothe...

Will my B660-F Motherboard handle a ROG Strix 4090...

ASUS TUF Gaming 750 W 80+ Bronze question

Computer illiterate. Don't know what SSD to use in...

Crosshair 6 Hero Q-code 79

What is causing "unknown usb device descriptor req...

ROG Maximus Z790 Hero

Gen4 m.2 nvme on PCIe 3 slot

Your opinion about switching from an Asus RTX 2060...

ASUS TUF GAMING Z690-PLUS WIFI D4, DDR4 4000 memor...