Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
Hi folksI have an issue trying to enable dual channel on this board. I have enabled XMP and have the dimms in the grey slots a1, b1, c1, d1. They are working but not performing well as shown in the UserBenchmark http://www.userbenchmark.com/UserRun...
Realtek audio on this board is very flat and poor sounding. Enhancment tab is missing and only shows "disable all enhancements". All features are missing! Equalizer is the one I really need. Please see screen shot. Tried reinstalls different re...
Hello, people, I will get a PC very soon but I need some help so I'm getting this PC:Core i7-8700KROG MAXIMUS X CODEG.Skill Trident Z RGB 16GB DDR4 4133MHz (F4-4133C19D)etc..Did I choose the right RAM or should I go for lower MHz The motherboard can ...
-------EDIT-------MODS I'm having trouble closing this thread. Can you help me close/delete it please.Beforehand these are the parts I used:Asus ROG Zeneith Extreme x399AMD Threadripper 1900X4 x 8GB G.Skill TridentZ RGB 3200mhz CAS 14Gigabyte GTX 108...
Hi there,I'm in process of updating my x299 build,and I plan on installing third rad in my tt view 71 TG case.And I was planning on top to have 6x140mm exhaust in push/pull and rear 140mm exhaust fans and in front and side 360mm rad in intake p...
Hi there Are there any useful options in BIOS to boot faster and get everything from 960 PRO M2 drive? CSM OR UEFI ? PCIE bandwith x2 or x4 ? If you know more than me please share with me. ThanksRad
I have been piecing together an ASUS-powered Baby AT K6-III+ using the following stuffASUS P5A-BAMD K6-3+ 450mhz @ 600mhz3dfx Voodoo 5500512mb RAMSCSI boot stackWin 98SEand wanted to dual-loop watercool it like my Threadripper build in the Case Mod f...
I'm considering a couple of new builds and looking at cpu's. Since they would never be OC'd what advantage, if any, would there be in using unlocked cpu's?edit to add.... one would be for gaming and the other for a multi-monitor office environment.
Hello everyone! I am about to buy a new motherboard and was considering the z370 Maximus X Hero. Only one small question though, in a review that I saw of the motherboard, there was a criticism that the CPU voltage did not sit at normal levels if MCE...
Are the fans replaceable and how does the whole thing go together, can you measure the thickness of the fans in there for me? I have 6x Delta 40mm 9500rpm Blowymatrons I need to do something with.
