Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Higher GPU temps

I upgraded my pc this week and the temps on my gtx 1080 are 20c to 25c higher then it was with the old system. I was around 28c on the cpu and gpu at idle. now i'm at 28c on the cpu and 55c on the gpu. Playing a game i'll hit around 60c to 65c on the...

Need held for g20cb gpu upgrade

I'm currently using the gtx 1070 version of the g20 and I bought the gtx 1080fe to upgrade it.Question, do I need to change jumper settings to combine the power of the bricks ? It has 180w and 230w power bricks.

kyrell by Level 8
  • 1324 Views
  • 1 replies
  • 0 kudos

Asus xg258q white screen problem.

Hey so i bought the asus xg258q 240hz, yesterday (25/10/18) and whenever i go play a game, it works fine, but when i then go out the game, and do some desktop work like browsing and stuff, the screen turns white like in the video. https://www.youtube...

Rog maximus x hero + m2 ssd

Hello there,I got a ROG MAXIMUS X HERO and I already have an NVMe SSD installed. I'm looking to buy one more disk but this time a M2 SATA SSD. Would this affect my Lanes or would it disable any SATA cable?Thanks in advance for any helpful reply!

Maximus XI Hero | 64GB Ram | Supported Modules

Hello,I'm planning on upgrading a machine on my LAN, utilizing a Maximus XI Hero and 64GB Ram.I've looked up some Ram which I think is supported, but looking for confirmation before blowing over £800 on it.The RAM is G.Skill part : F4-3600C17Q-64GTZK...

irishj by Level 7
  • 5242 Views
  • 3 replies
  • 1 kudos

Maximus XI Hero & NVMe question

I have an Maximus XI Hero with an 1080Ti in the first PCIe slot, a SoundBlaster Z in the bottom PCIe x1 and 4 sata drives.I was wondering if I put an 970 Evo NVMe M.2 will my Ti run at x16 or x8?Thanks in advance

lazyd by Level 7
  • 1833 Views
  • 2 replies
  • 0 kudos

Rtx2080ti on Maximus XI formula or code

Hi allThinking of upgrading my maximus viii formula, 6700k, 1080ti oc strix to the new maximus xi, i9-9900k with rtx2080ti strixMy question is if the rtx since it's a bit "taller" than the 1080 will cover the motherboard's logoOn the viii the 1080 co...

Maximus XI Hero does not recognize bootable SSD

I am building a new system, and moving a Samsung primary SSD (Win 10 digital license) from the old system. BIOS sees the drive, but says Not Bootable. I also have a Samsung M.2 (new, empty) which will eventually become the primary drive. Also, I don'...