Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Maximus XI Formula + Noctua NH-D15

Hi.I'm building a new PC with a 'Maximus XI Formula' and was planning to buy the 'Noctua NH-D15' CPU cooler. I'm just a bit reluctant concerning it's size - will it fit among the CrossChill EK III block? I'm not worried about the fan over the RAM mod...

pmfr01 by Level 7
  • 1876 Views
  • 0 replies
  • 0 kudos

Rog scar gpu

Hi! I'm a newbie here in this forum..I have a GL503 ROG SCAR with 4GB 1050Ti GPU.This is a dumb question but, is it possible to upgrade gaming laptop GPU? Thanks.. :confused:

RAMPAGE IV EXTREME and XEON E7-8880 Build?

HI all,Ive got Rampage IV Extreme x79 motherboard wich is 2011-1 (v2) socket, I also got E7 8880 v2 chip. I wonder if it is possible to marry them both into something that will work? Right now the chip cover is not closing on E7 as it has tabs that p...

Asus Pg27uq 4k Hdr Hdmi Problem

Hii have joined the forum to seek some advice and help others with any questions about my experience with the Pg27uq. i have stumled on a problem with the hdmi 2.0 connection on the monitor.Far as i can tell the monitor no longer accepts 3840x2160p o...

Hayta by Level 7
  • 1433 Views
  • 0 replies
  • 0 kudos

Seeking Battery Backup Suggestions

Hello everyone, I'm looking for suggestions for a battery backup to finish off my most recent build, budget is $100-$300. I have never had one before so I'm unfamiliar with what I should be looking for, what's important, what's just fluff on the labe...

Sirrrus by Level 7
  • 1713 Views
  • 2 replies
  • 0 kudos