Hardware & Build Advice
Hardware & Build Advice
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

ASUS ROG Rapture GT-AX11000 mesh

Hi, I currently have a ASUS ROG Rapture GT-AX11000 running fine, however I would like to add a repeater or mesh as it is too weak in the further areas of the house.What would I need to expand that as a mesh? What products would be compatible? I can't...

ROG Strix Helios PCI-E 4.0 Riser Cable

Has anyone found a PCI-E 4.0 riser cable with mounting holes which align with the mounting holes in the PSU shroud for the Helios case? There are a few 90 degree 4.0 risers out there (since the ROG one hasn't been updated), but I'd prefer something ...

Z690 Formula Not Posting - Error Code 50/53

Hey All, I just went through replacement of Z690 Hero with reversed capacitor. Went with a Z690 formula since replacement was not an option, only refund. System was working great for a week or so, but then noticed one of my memory sticks (2 x16 F5-...

New build - no signal to iGPU or 3080 Ti

Hi all, hope someone can help with my issue...I built my pc a few days ago and since I've tried to boot, it doesn't post and there's no signal to my monitor via the iGPU or the 3080 Ti.SpecsMB: Asus Z690 Maximus heroRAM: 128gb (4x32gb) g.skill Triden...

saadiq7 by Level 7
  • 14 replies
  • 0 kudos

AHCI mode in GX800 bios

I am trying to secure erase the 3 ssd drives to freshen up the system. This technique brings the ssd back to factory fresh and increases write speed. In order to do this with Parted Magic, I need to change the mode from RAID to AHCI. I cannot seem...

JATGFU by Level 7
  • 0 replies
  • 0 kudos