Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...
I have a 5v strip in my ek velocity cpu block I'm wanting to replace with a 12v strip from an rgb pump I have lying around. Is it a bad idea to swap these? Or does it matter? I accidentally plugged the 5v into the 12v connector on the motherboard ...
Hello all,I been getting pop and crackling noise here and there and was told to use LatencyMon if that shows anything and it came up with "Your system seems to be having difficulty handling real time audio and other tasks. I only built the computer ...
Hi.I recently build my new system but I it seems that I have this problem of incompatibility with memory sticks and I want to ask you to help me with ideas of what shoul I do to solve it. Thank you.System:MB: MAXMIUS XI EXTREME - UEFI 0802 latestCPU:...
Hi!Which PCIe slots are supporting PCIe bifurcation in R6E: all or specific ones? This is to understand which slots PCIe splitter card as Hyper M.2 X16 could be populated and set-up in BIOS.Thanks!
I took off the i/o shield, so it fits now. But its hard to run cable management. Because Board block the holes in case that wire go tho.
I just purchased an aquacomputer male to female temp sensor. I heard it is possible to set the fan curve to water temp when watercooling. Can someone explain how to do this? Can't find any info online
SoI'm finally assembling my beast and I'm looking to optimise the NVMEI have Samsung 970 pro that I'm really not sure how best to optimiseThe PCIe slots are set up with dual RTXti and I will probably put my sound blaster in the X4 slot. I'm a bit fog...
I have a Asus Strix GTX1080 Advanced edition, out of nowhere, in the middle of a game, it froze and then wouldn't output any video. After restarting still no video output, the fans spin then stop after couple second and the lights glow on and off ora...
Hello all,So I am building my very first computer from ground up before that I usually get them pre built my system I am moving from is a 6700k with a maximus VIII Board. I would like to get some advice as all my parts arrive tomorrow.I am getting a ...
Hey guys I'm installing the GPU side of my loop today cause I just received my 2nd EVGA 2080 ti yesterday. I've had the system running the last couple of weeks with the CPU loop and just using the fans on the first card. I'm going to plug in the PSU ...
