Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

Dbad bug

When I press the right dpad it brings up the command center and when I press the command center button it presses the right dpad wtf had this bug for a min and cannot play hell divers

Problem with ROG Gladius II Origin

Hey everyone,I've had my ROG Gladius II Origin for over 6 months now, but recently it's been acting up. The buttons technically work, but there’s an issue with the clicking. When I hold a button down, it randomly stops registering – almost like a sen...

Asus Rog Strix B550-F Gaming Wifi ii DRAM LED

Specs:Ryzen 9 5900xGeForce RTX 3080Corsair Vengence Pro 32gb 3600Once I give power to the machine, then press the power button, everything turns on, and runs perfectly. Only thing is the Orange LED remains Solid at DRAM. No Post either. Things I’ve t...

Error beep with CPU fan / video card

Hello everyone,This is my first time posting here.I built my own gaming PC. I put an AMD RYZEN 7 5700X CPU on an ASUS Prime B550-PLUS AC-HES AMD AM4 motherboard (+ speaker buzzer), and a Thermalright PS120SE ARGB CPU fan (with thermal paste).For the ...

fredmtl by Level 7
  • 457 Views
  • 2 replies
  • 1 kudos

Asus Hyperion GR701 - Fan+ARGB hub

Is it possible to buy the hub and powercables separetly?  If not, can connect the FrontIO and SidePanel panel to a MotherBoard Header directly?Considering that my Hub burnet out, what would my options to get my RGB working again

Matt181 by Level 9
  • 3668 Views
  • 24 replies
  • 2 kudos

Error message A2 one ROG STRIX X299-E

Hello everyone,I tried to change my SSD lately but since then I have the error code A2. I've been looking a lot and I know this code is related to the SSD M2While trying to change it unfortunatly the part where we add the screw on the left broke. I t...

sambzz by Level 7
  • 193 Views
  • 0 replies
  • 0 kudos

Armoury Crate makes system unstable (unusable)

Hi. Armoury Crate is driving me mad.I need this stupid software as my Ryujin AIO watercooling system has a small display on the cooling block which should be controllable (it should be able to display a chosen GIF image, or, as I prefer, be used to d...

W_ill by Level 8
  • 1964 Views
  • 9 replies
  • 1 kudos