Hardware & Build Advice
Hardware & Build Advice
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

[INFORMATION] Secure Boot : Windows UEFI CA 2023 Update

Hi everyone, https://support.microsoft.com/topic/1db237d8-9f3b-4218-9515-3e0a32729685https://support.microsoft.com/topic/a7be69c9-4634-42e1-9ca1-df06f43f360d - Secure Boot Windows UEFI CA 2023 Updater | Download : Link Check/Update Process :Check W...

MoKiChU_1-1761233314470.png
MoKiChU by Level 40
  • 22240 Views
  • 53 replies
  • 16 kudos

DRAM Stability - Methodology & Tools

Introduction Many users enter the world of DRAM overclocking with high expectations, especially after purchasing pre-binned kits that promise extreme speeds and tight timings. The logic seems simple: if a manufacturer rates a kit for 8000 MT/s, it sh...

Silent_Scone_0-1739425315162.png Silent_Scone_0-1739253034190.png ezgif-3242b6279bacca.jpg

memory fans

Anyone have thoughts about memory fans, that is, the fan that overlies the RAM chips themselves. I hooked one up from Crucial (DDR4, 3200Mhz) to an Z390-A and it runs really fast, over 3200 Hz. Not sure if it makes much difference though. Are memory ...

Which Thermal Paste Would You Use ?

Has anyone tried Icy Diamond Thermal Paste..This stuff is thick like Body Filler you would put in a fender ding on a car.Maybe thicker..I have herd good things about the temps though on the web but nothing here.Has no one here ever tried it..I have 2...

NIK111 by Level 7
  • 4935 Views
  • 12 replies
  • 0 kudos

Start button

I just finished building a Asus Rampage VI Omega with a i9-9820 processor. The start button on my case(Corsair 760) does not work. I am using the start button on the motherboard to fire up the computer and light up the start button on my case. The ...

setting up raid on XI code

hi, I will be setting up a raid 0 soon and looking it up on how to do it and I am getting mixed information. there is ways to do it thorough the bios, then you need to download a driver from intel then install it through the drivers section where you...

GT-AX11000 Switch Connections

I have connected a TP-Link SG-108PE switch to my AX11000 router but I can not seem to get it to work I have the settings on the switch correct but for some reason the switch doesn't seem to work as should, I can access it through my PC but that is it...

VGA White light on my Asus z390 e Mobo

Hi guys i had this strange thing happen to me, no idea how i turned my pc on it booted normally and all was well and then i started playing NFS game rand fine no crahses had about 2 hour game and then i closed the game everything was fine and then i ...

AliAPCMR by Level 10
  • 3801 Views
  • 0 replies
  • 0 kudos

ROG Strix X470-I - Maximum Sound Level too low

Hi,i love my ROG Strix X470-I Mainboard, but te max. Soundlevel (headset) is a little bit too low for my taste.I tested it with two different headsets (Sennheiser PC360, Philips Fidelio X2HR/00 with VMODA Boom pro Mic) at the rear and front audio por...

MarcT by Level 7
  • 1361 Views
  • 1 replies
  • 0 kudos

Failed builds

I recently have had some failed builds. I think putting the processor into the motherboard at an angle is the problem. Should I just drop in the i9 processor into the 2666 socket.